Differences

This shows you the differences between two versions of the page.

--- en:3s:configuration [2020/06/29 08:32] – vidb
+++ en:3s:configuration [2020/07/20 13:32] (current) – vidb
@@ Line 12: / Line 12: @@
 |< 100% 150px >|
-^ Icons color meaning |||
+^ Border color meaning |||
 |{{:playground:card_0.png?600|}}|Gray|This condition doesn't have to be met because it's disabled|
 |{{:playground:allowance_1.png?600|}}|Grayed out|This condition is enabled, but it can't be met right now|
@@ Line 93: / Line 93: @@
 | Counting type      |Choose if the counting of people is with digital IO or communication   |
 | Presence time-out    |Set how long the presence sensor is active after detecting someone   |
-| Entry gate time-out     |Set how long the entry doors are open after the TOF sensor has detected someone      |
+| Entry gate time-out     |Set how long the entry doors are open after the conditions are met. If the TOF sensor detects person entering, the timer is reset     |
-| Exit gate time-out      |Set how long the exit doors are open after the TOF sensor has detected someone  |
+| Exit gate time-out      |Set how long the exit doors are open after the conditions are met. If the TOF sensor detects person exiting, the timer is rest  |
 | Alarm duration      |Sets duration time of the alarm  |
 | Alarm beeper enabled      |Enable or disable alarm beeper   |
@@ Line 124: / Line 124: @@
 ^ ||
-| Master code      |The code which employee has on a card or qr code. When the master code is scanned, red an green light will start flashing. If the master code is scanned, then normal cards are scanned and master code is scanned again, all the normal cards will be added to the code list (if they aren't already on it) and they will be granted L2 access. If master code is scanned and then scanned again, all the entries on code list will be deleted     |
+| Master code      |When the master code is scanned, red an green light will start flashing. If the master code is scanned, then normal cards are scanned and master code is scanned again, all the normal cards will be added to the code list (if they aren't already on it) and they will be granted L2 access. If master code is scanned and then scanned again, all the entries on code list will be deleted     |
 | Send LAN code query      |If scanned code is not on the code list for that device, a query will be sent to other devices in the system. If it gets the response from other device, that the code is on it's list, access is granted  |
 | Process LAN code query     |Enable to process code query and send back answer   |
@@ Line 211: / Line 211: @@
 -This configuration is useful when for example there's two entrances with different level of security. For less secure entrance just a card is needed to enter, but for more secure entrance card can't be used in case it's stolen, so only receptionist can let you in (e.g. bank's vaults).
-{{:en:3s:9a.png?400|}} {{:en:3s:9b.png?400|}}
+{{:en:3s:popravi.png?400|}} {{:en:3s:9b.png?400|}}
 {{:en:3s:15mm-polycarbonate-bank-security-door.jpg?1000|}}