Differences

This shows you the differences between two versions of the page.

--- en:3s:user_manual [2020/07/22 06:31] – vidb
+++ en:3s:user_manual [2020/07/22 13:26] (current) – vidb
@@ Line 16: / Line 16: @@
 {{:en:3s:vector_4d_-_downward_-_small.png?600|}}
+==== QR code and RFID card reader ====
+Reader is installed on Safe gate to determine person's user profile.
+{{:en:hiq_hw:pasted:20200331-133854.png}}
+{{:en:3s:capture3.png?200|}}
+==== Hand sanitizer ====
+Safe gate checks if person that wants to enter, had applied hand sanitizer.
+{{:en:3s:germx.jpg?300|}}
+{{:en:3s:capture1.png?200|}}
+==== Mask and body temperature scanner ====
+Scanner scans person's face for mask and check his temperature. If it's not wearing a mask or it's body temperature is too high, it's not allowed to enter.
+{{:en:3s:capture2.png?200|}}
 ==== Entry conditions ====
-Safe gate can check if the person entering is wearing a face mask, if it applied disinfector and if it has a fever. If it fails the conditions that are required, the person can't enter.
+Safe gate can check if the person entering is wearing a face mask, if it applied hand sanitizer and if it has a fever. If it fails the conditions that are required, the person can't enter.
-Safe gate allows granting entry by scanning a card (or QR code). There are three access levels:
+Safe gate allows granting entry by scanning a card (or QR code). There are three user profiles:
 |< 100% 150px >|
-^ Access level meaning ||
+^ User profiles - access level meaning ||
-|L1| This is normal level of access |
+|L1| This is **normal** level of access |
-|L2| This is VIP level of access|
+|L2| This is **VIP** level of access|
-|UL| This is employee level of access|
+|UL| This is **employee** level of access|
 Alternatively, person can enter if the receptionist gives it an allowance. In this case, receptionist confirms level of access by identifying the person.
@@ Line 41: / Line 62: @@
 |{{:playground:allowance_1.png?600|}}|Grayed out|This condition is enabled, but it can't be met right now|
 |{{:playground:confirmation_2.png?600|}}|Yellow|This condition must be met and is waiting for the person to do it|
-|{{:playground:occupied_1.png?600|}}|Orange|From now on you can enter only with L2 allowance|
+|{{:playground:occupied_1.png?600|}}|Orange|From now on you can enter only with **VIP** allowance|
 |{{:playground:enter_2.png?600|}}|Green|Everything is okay, you're clear to enter|
 |{{:playground:allowance_4.png?600|}}|Red|Something is wrong, you must not enter|
@@ Line 48: / Line 69: @@
 |< 100% 150px >|
 ^ Status overview       |||
-|{{:playground:capture.png?400|}}| Occupation status and limit count     |It shows occupied status and remaining count to the limit of people. First (upper) number shows count of people with normal access, second (lower) number shows count of people with VIP access |
+|{{:playground:capture.png?400|}}| Occupation status and limit count     |It shows occupied status and remaining count to the limit of people. First (upper) number shows count of people with **normal** access, second (lower) number shows count of people with **VIP** access |
-|{{:playground:capture1.png?400|}}| Disinfector status      |It shows if person had applied a disinfector  |
+|{{:playground:capture1.png?400|}}| Hand sanitizer status      |It shows if person had applied hand sanitizer  |
 |{{:playground:capture2.png?400|}}| Allowance status      |It shows if person has a fever and if he wears a facemask   |
 |{{:playground:capture3.png?400|}}| Card reader   |It shows if the use of entry card is needed and the user's level of access   |
-|{{:playground:capture4.png?400|}}| Confirmation status    |It shows if the receptionist had left you in and the person's level of access  |
+|{{:playground:capture4.png?400|}}| Confirmation status    |It shows if the receptionist had left you in and the person's user profile  |
 |{{:playground:capture5.png?400|}}| Enter status    |It shows if person should enter or exit |
-Different examples of display:
+Different scenarios shown on display:
-In the upper left corner the counter is shown. If it's border is green, both level of access can enter. Upper counter is for the number of the people with L1 access that can still enter the building (2), bottom counter is for the number of the people with L2 access that can still enter (4). Caption is set to "Welcome"
+In the upper left corner the counter is shown. If it's border is green, both user profiles can enter. Upper counter is for the number of the people with **normal** profile that can still enter the building (2), bottom counter is for the number of the people with **VIP** profile that can still enter (4). Caption is set to "Welcome"
-{{:en:3s:1aa.png?1000|}}
+{{:en:3s:1aa.png?600|}}
-When L1 capacity is full, but L2 can still enter the border of counter turns orange and the caption changes (for example) to: "VIP only".
+When **normal** capacity is full, but **VIP** can still enter the border of counter turns orange and the caption changes (for example) to: "VIP only".
-{{:en:3s:2aa.png?1000|}}
+{{:en:3s:2aa.png?600|}}
-When L2 capacity is also full and only UL access can enter, the border of counter icon changes to red and the big icon changes to this. Here the caption is set to: "Filled to capacity and the text is set to: "Please wait for freeing."
+When **VIP** capacity is also full and only **employees** can enter, the border of counter icon changes to red and the big icon changes to this. Here the caption is set to: "Filled to capacity and the text is set to: "Please wait for freeing."
-{{:en:3s:3aa.png?1000|}}
+{{:en:3s:3aa.png?600|}}
 This is the icon that is shown if the alarm is triggered. The border of enter status changes to red. The caption changes to: "Alarm", and the text changes to: "Unauthorized entry, leave immediately".
-{{:en:3s:4aa.png?1000|}}
+{{:en:3s:4aa.png?600|}}
 This is the icon that is shown if the fever is detected or if the person doesn't wear a face mask. Allowance status' icon border changes to red. The caption changes to "Warning" and the text changes to "Fever detected".
-{{:en:3s:5aa.png?1000|}}
+{{:en:3s:5aa.png?600|}}
 This is the icon that is shown if the required condition is to disinfect hands. Icon's border is yellow which means it's required. Text is set to " Please disinfect hands".
-{{:en:3s:6aa.png?1000|}}
+{{:en:3s:6aa.png?600|}}
 This is the icon that is shown if the required condition is for person to scan his face for mask and to measure temperature. Icon's border is yellow which means it's required. Text is set to "Please look at thermal scanner".
-{{:en:3s:7aa.png?1000|}}
+{{:en:3s:7aa.png?600|}}
 This is the icon that is shown if the required condition is to scan the access code. Icon's border is yellow which means it's required. The text is set to "Scan access code to enter".
-{{:en:3s:8aa.png?1000|}}
+{{:en:3s:8aa.png?600|}}
 This is the icon that is shown if the receptionist's confirmation is required to enter. Icon's border is yellow which means it's required. The text is set to: "Please wait for confirmation."
-{{:en:3s:9aa.png?1000|}}
+{{:en:3s:9aa.png?600|}}
 This is the icon that is shown if the person is allowed to enter. Icon's border changes to green which means everything is okay and you're cleared to enter. The text is set to: "Please enter".
-{{:en:3s:10aa.png?1000|}}
+{{:en:3s:10aa.png?600|}}
 ==== Entering procedure ====
-When the person enters the building and stands before the safe gate, presence sensor is triggered. LED and graphical display show required conditions to enter.
+When the person aprroaches the safe gate, presence sensor is triggered. LED and graphical display show required conditions to enter.
-Firstly, the disinfection should be applied and face scan performed, if necessary. Face scanner checks if the person is wearing a mask and if his body temperature is normal. Then one of two steps is required to enter. Person must scan its card, to determine its level of access and if it had completed all of the necessary steps for that level. Alternate option is that receptionist opens the door. After completing the necessary steps, button for allowing L1 and/or L2 access become enabled, receptionist then confirms person's level of access and it can enter.
+Firstly, the hand sanitizer should be applied and face scan performed, if necessary. Face scanner checks if the person is wearing a mask and if his body temperature is normal. Then one of two steps is required to enter. Person must scan its card, to determine its user profile and if it had completed all of the necessary steps for that profile. Alternate option is that receptionist opens the door. After completing the necessary steps, button for allowing **normal** and/or **VIP** profile become enabled, receptionist then confirms person's profile and it can enter.
 Next to the door is a semaphore. If the red light is on, that means you didn't complete all of the required conditions to enter. If, along with red light, alarm starts beeping too, the person must leave the building immediately. This happens for example if fever is detected. When the green light on the semaphore turns on, the person is clear to enter.
-It's possible that the limit of people is reached. If that happens, person can't enter the building even if all of the required conditions were completed. First limit is for L1, person with that access can't enter after that limit is reached. Second limit is for L2. After that limit is reached, only UL access is allowed inside (employees).
+It's possible that the limit of people is reached. If that happens, person can't enter the building even if all of the required conditions were completed. First limit is for **normal** profile, person with that profile can't enter after that limit is reached. Second limit is for **VIPs**. After that limit is reached, only **employees** are allowed inside.
 There are two allowance types, permission and prevention. If permission is selected, doors are closed until all condition are fulfilled, after which they open. If the prevention is selected, doors are open. If person fails to meet all conditions, doors close.
+{{:en:3s:diagramhm_1_.png?1000|}}