Differences

This shows you the differences between two versions of the page.

--- en:goflex_hems:hardware:pm1-e-d [2018/10/05 13:32] – ↷ Page moved from hiq_energy:goflex_hems:hardware:pm1-e-d to en:goflex_hems:hardware:pm1-e-d goran.kocjancic
+++ en:goflex_hems:hardware:pm1-e-d [2019/08/14 10:53] (current) – removed goran.kocjancic
@@ Line 1: / Line 1: @@
-====== Single phase power-meter ======
-**Single phase power-meter**
-<WRAP column 350px>
-{{ hiq_energy:goflex_hems:hardware:sdm120c.png?nolink |}}
-</WRAP>
-<WRAP column 300px>
-| Model number: ^ PM1-E-D                             |
-| Mounting:     | DIN rail, 1M, 18 mm                 |
-| Dimensions:   | 18 × 62 × 119 mm                    |
-^ Used for measuring power and energy of                 ||
-| ✔ | single-phase energy sources                        |
-| ✔ | single-phase energy consumers                      |
-</WRAP>
-<WRAP clear></WRAP>
-===== Applications =====
-  * Digital multi-function energy meter for single phase networks
-===== Features =====
-  * DIN rail mounting with direct connection up to 45A
-  * Compact design in a single module 18mm wide
-  * Seal-able cover(phase and neutral terminals)
-===== General description =====
-The PM1-E-D series is an advanced single phase energy monitoring solution with built-in configuration push button and LCD data displaying, particularly indicated for active energy and other parameters metering and for cost allocation. Housing for DIN-rail mounting,IP51 protection degree, direct connection up to max 45A.
-<WRAP pagebreak></WRAP>
-===== Technical specifications =====
-|< 35% 40% >|
-| Nominal voltage(Un)           |             230 VAC|
-| Operational voltage           |           176-276 V|
-| Insulation capabilities                           ||
-| - AC voltage withstand        |   4 KV for 1 minute|
-| - Impulse voltage withstand   |         6 kV-1.2 µS|
-| Basic current (Ib)            |                 5 A|
-| Maximum rated current (Imax)  |                45 A|
-| Operational current range     |        0.4% Ib-Imax|
-| Over current withstand        |  20 Imax for 0.01 s|
-| Operational frequency range   |         50 or 60 Hz|
-| Internal power consumption    |         ≤ 2 W/10 VA|
-| Communication type            |  RS485(half-duplex)|
-| Communication protocol        |          Modbus RTU|
-| Pulse output 1                |        configurable|
-| Pulse output 2                |        1000 imp/kWh|
-| Max reading                   |         99999.9 kWh|
-===== SDM120 Terminals =====
-<WRAP column 75%>
-|< 50% 30% 10% 10% >|
-^    PM1-E-D                       ||^   Power source   |
-| Phase IN          |  L↑   |   1  |     L              |
-| Neutral           |  N    |   4  |     N              |
-|< 50% 30% 10% 10% >|
-^    PM1-E-D                       ||^  Power consumer  |
-| Phase OUT         |  L↓   |   2  |    L               |
-|< 75% 27% 7% 33% >|
-^  PM1-E-D                         |^  CAD-232-A2-IQ  ^  BR-WN-W  |
-| RS485               |        8   |      C          |    GND     |
-| :::                 |        9   |      B          |   Tx/T-    |
-| :::                 |        10  |      A          |   Rx/T+    |
-</WRAP>
-<WRAP column 20%>
-{{hiq_hardware:sdm120c-io.png?nolink}}
-</WRAP>
-<WRAP clear></WRAP>
-{{ hiq_hardware:eastron_sdm120-modbus_user_manual_2016_v2_6.pdf | PM1-E-D user manual}}
-{{ hiq_hardware:sdm220modbus_protocol_v1.1.pdf | PM1-E-D Modbus protocol}}
-<WRAP pagebreak></WRAP>