Differences

This shows you the differences between two versions of the page.

--- en:goflex_hems:hardware:pm3-i-d [2018/10/05 13:32] – ↷ Page moved from hiq_energy:goflex_hems:hardware:pm3-i-d to en:goflex_hems:hardware:pm3-i-d goran.kocjancic
+++ en:goflex_hems:hardware:pm3-i-d [2019/08/14 10:53] (current) – removed goran.kocjancic
@@ Line 1: / Line 1: @@
-====== Three phase power-meter ======
-**Three phase power-meter**
-<WRAP column 350px>
-{{ hiq_energy:goflex_hems:hardware:pm3-i-d.png?nolink |}}
-</WRAP>
-<WRAP column 300px>
-| Model number: ^ PM3-I-D                       |
-| Mounting:     | DIN rail, 3M, 53 mm           |
-| Dimensions:   | 53 × 84 × 66 mm               |
-^ Used for measuring power and energy of                ||
-| ✔ | three-phase energy sources                        |
-| ✔ | three-phase energy consumers                      |
-</WRAP>
-<WRAP clear></WRAP>
-===== Applications =====
-  * Digital multi-function energy meter for or 3-phase sources or consumers
-===== Features =====
-  * Three phase direct connection up to 80 A
-  * Serial RS485 communication
-  * Display LCD 7+1 digit
-  * Multi-functional front LED
-===== General description =====
-The PM-3-IQ is intended for energy measurements in three-phase electrical power network and can be used in residential, industrial and utility applications. Meter measures energy directly in 4-wire networks according to the principle of fast sampling of voltage and current signals.
-Connecting terminals can be sealed up against non-authorized access with protection covers. They are built to be fastened according to EN 60715 standard. Meter has built-in  RS485 serial communication with the MOD-BUS protocol which enables data transmission and thus connection of the measuring places into the network for the control and management with energy.
-<WRAP pagebreak></WRAP>
-===== Technical specifications =====
-|< 35% 40% >|
-| Nominal voltage               |        230 VAC (-20..+15%) |
-| Power connector               |   2,5 .. 16 mm<sup>2</sup> |
-| Reference current             |                        5 A |
-| Maximum current               |                       80 A |
-| Operational frequency range   |                 50 or 60 Hz|
-| Internal power consumption    |                     < 8 VA |
-| Communication type            |         RS485(half-duplex) |
-| Communication protocol        |                 Modbus RTU |
-^ Accuracy                                                  ||
-| Active energy (Wh)            |       Class 1 IEC 62053-21 |
-| :::                           |         class B EN 50470-3 |
-| :::                           |     ±1.5% from Imin to Itr |
-| :::                           |       ±1% from Itr to Imax |
-^ Ambient conditions and Safety                             ||
-| Dust/water protection         |                       IP50 |
-| Operating temp. range         |               -25 ... 55°C |
-| Indoor meter                  |                        yes |
-| Protection class              |                         II |
-^ EC Directives conformity                                  ||
-|          EC Directive on Measuring Instruments 2014/32/EU ||
-|                            EC Directive on EMC 2014/30/EU ||
-|                    EC Directive on Low Voltage 2014/35/EU ||
-|                              EC Directive WEEE 2002/96/EC ||
-===== Terminals =====
-<WRAP column 70%>
-|< 50% 30% 10% 10% >|
-^    PM3-I-D                       ||^   Power source   |
-| Phase 1 IN          |  L1↑  |   1  |     L1           |
-| Phase 2 IN          |  L2↑  |   4  |     L2           |
-| Phase 3 IN          |  L3↑  |   7  |     L3           |
-| Neutral             |  N    |  10  |     N            |
-|< 50% 30% 10% 10% >|
-^    PM3-I-D                       ||^  Power consumer  |
-| Phase 1 OUT         |  L1↑  |   3  |    L1            |
-| Phase 2 OUT         |  L2↑  |   6  |    L2            |
-| Phase 3 OUT         |  L3↑  |   9  |    L3            |
-| Neutral             |  N    |  11  |    N             |
-|< 75% 27% 7% 33% >|
-^  PM3-I-D                        |^  CAD-232-A2-IQ  ^  BR-WN-W  |
-| RS485               |        15  |      A          |   Rx/T+   |
-| :::                 |        16  |      B          |   Tx/T-   |
-</WRAP>
-<WRAP clear></WRAP>
-<WRAP pagebreak></WRAP>
-===== Connection =====
-{{ hiq_energy:goflex_hems:hardware:pm3_connection.png?nolink |}}
-===== Manual =====
-{{ hiq_energy:goflex_hems:hardware:p_wm3_8x_gb_22433920_ver_2_03.pdf | PM3-I-D Technical Documentation}}