Differences

This shows you the differences between two versions of the page.

--- en:hems:methods_resources:safety [2018/10/09 11:12] – created goran.kocjancic
+++ en:hems:methods_resources:safety [2018/10/09 11:55] (current) – goran.kocjancic
@@ Line 1: / Line 1: @@
-===== SAFETY INSTRUCTION =====
+====== SAFETY INSTRUCTIONS ======
-**Before start with installation, assembly, disassembly, inspection, or any other operation read safety instructions. They contain general safety information for devices approved by Robotina d.o.o..**
+Use the following safety guidelines to ensure your own personal safety and to protect your equipment and working environment from potential damage.
-{{:en:hems:methods_resources:warning.png?nolink|}} **DANGER!**
+**NOTICE**: All applicable local and national codes that regulate the installation and operation of the equipment must be strictly followed.
-**Disregard manufacturer's safety instructions could result in material damage, injury or even death.**
+**NOTICE**: Installation and electrical connection of the equipment must be carried out by qualified and authorized personnel.
-{{:en:hems:methods_resources:el_warning.png?nolink|}} {{:en:hems:methods_resources:warning.png?nolink|}} **DANGER!**
+----
-**During operation is device under load!**
+Notices which require special attention are highlighted with following symbols:
+  * {{:en:hems:methods_resources:warning.png?nolink|}} **WARNING** - which indicates that death, severe personal injury or substantial property damage can result if proper precautions are not taken.
+  * {{:en:hems:methods_resources:warning.png?nolink|}} **CAUTION** - which indicates that minor to medium personal injury or property damage can result if proper precautions are not taken.
+----
-{{:en:hems:methods_resources:warning.png?nolink|}} **WARNING!**
+This product can only function correctly if it is transported, stored, set up and installed correctly, and operated and maintained as recommended according to manufacturer’s instructions.
-**Before installation, disassembly, inspection, or any other operation, make sure that the device is disconnected from the power supply and that with your doing you don’t endanger yourself or others.**
+{{:en:hems:methods_resources:warning.png?nolink|}} **WARNING**: Failure to comply with manufacturer’s safety and installation instructions or applicable codes and standards can result in damage to equipment or serious injury to personnel.
+{{:en:hems:methods_resources:warning.png?nolink|}} **WARNING**: Before installing, servicing or repairing electrical equipment power source must be disconnected.
-{{:en:hems:methods_resources:warning.png?nolink|}} **WARNING!**
+{{:en:hems:methods_resources:warning.png?nolink|}} **CAUTION**: Don’t try to open the device, any interference or change may impact device’s properties and significantly affect safety.
-**Don’t try to open the device.
+  * The device must be installed inside electrical enclosure where it cannot endanger people or environment.
+  * During operation, device must not be exposed to high temperature, high humidity, excessive dust, corrosive gases, vibration or shock.
-Any interference or change may impact device’s properties and significantly affect safety.**
-{{:en:hems:methods_resources:warning.png?nolink|}} **WARNING!**
-**Before connecting device to the power supply, assure that all wires are connected in accordance with the manufacturer's instructions.**
-Before continue with installation read the manufacturer's installation requirements:
-  * Installation and electrical connection of the equipment described in this manual must be carried out by qualified or authorized personnel.
-  * The device must be installed inside the electric box where cannot endanger people or environment.
-  * During the operation device must not be exposed to humidity, dust, mold or other weather phenomena.
   * All connected wires must comply with manufacturer's specifications.
-  * For installation use only verified electrical-installations tools.
+  * For installation use only tools and equipment with non-conducting handles.
-  * Around the device has to be assured sufficient ventilation space.
+  * Sufficient ventilation space has to be assured around device for proper operation.
   * The manufacturer does not undertake any liability for material or personal damage resulting from use or handling which is not in accordance with the manufacturer's safety instructions.