Differences

This shows you the differences between two versions of the page.

--- en:hems_nedo_idrija:universe [2020/09/29 06:55] – [Storage] domen
+++ en:hems_nedo_idrija:universe [2020/09/29 07:10] (current) – domen
@@ Line 291: / Line 291: @@
 <WRAP clear></WRAP>
+----
 ====== My Things and Smart-grid settings ======
@@ Line 299: / Line 302: @@
   * Sensors.
-====== Consumers ======
+===== Consumers =====
 <WRAP column 450px>
@@ Line 310: / Line 313: @@
 The form of a card of each consumer is composed of the general part, history and settings part.
-===== General =====
+==== General ====
 General part contains:
@@ Line 321: / Line 324: @@
 **Power** label contain the information of device consumption power in watts.
-===== History =====
+==== History ====
 History part shows historical consumption of a device. The temporal range can be selected as daily, weekly, monthly or yearly. Daily and weekly range shows power consumption in watts, while monthly and yearly range shows energy consumption in kilowatt-hours.
@@ Line 327: / Line 330: @@
 The interface enables time-frame selection and time-frame alignment to current time.
-===== Settings =====
+==== Settings ====
 **Manual override** presents the time in minutes. When the user switches on the device, the device will automatically turn off after manual override minutes.
@@ Line 337: / Line 340: @@
 If manual override is bigger than 0, the device will switch off automatically after specified number of minutes.
-==== Smart grid settings ====
+=== Smart grid settings ===
 **Cloud optimization** enables or disables smart grid service.
@@ Line 370: / Line 373: @@
 Producers present devices or systems that produce electrical energy. Example of such devices are solar power plant, wind power plant, diesel generator and others. An example on the following figure shows solar power plant.
-===== General =====
+==== General ====
 General part contains:
@@ Line 379: / Line 382: @@
 **Power** label contain the information of device production power in watts.
-===== History =====
+==== History ====
 History part shows historical production of a device. The temporal range can be selected as daily, weekly, monthly or yearly. Daily and weekly range shows power production in watts, while monthly and yearly range shows energy production in kilowatt-hours.
@@ Line 393: / Line 396: @@
 Storage present battery as shown in an example figure on the left.
-===== General =====
+==== General ====
 General part contains:
@@ Line 402: / Line 405: @@
 **Power** label contain the information of charging or discharging power in watts.
-===== History =====
+==== History ====
 History part shows historical charging or discharging power of a device. The temporal range can be selected as daily, weekly, monthly or yearly. Daily and weekly range shows power charging or discharging in watts, while monthly and yearly range shows energy charged or discharged in kilowatt-hours.
@@ Line 414: / Line 417: @@
 <WRAP column 650px>
+Sensors present devices or systems that measure various quantities, such as temperature, humidity. The left figure represent a combined temperature and humidity sensor.
+==== General ====
+General part contains:
+**Name** of a sensor, which can be changed by user.
+**Icon** represent the type of sensor.
+**Temperature** label contain the information of temperature measurement in °C.
+**Humidity** label contain the information of relative humidity in %.
+==== History ====
+History part shows historical sensor measurements. The temporal range can be selected as daily, weekly, monthly or yearly.
+The interface enables time-frame selection and time-frame alignment to current time.
 </WRAP>