Differences

This shows you the differences between two versions of the page.

--- en:hiq_home:faq [2019/07/24 06:39] – ↷ Links adapted because of a move operation goran.kocjancic
+++ en:hiq_home:faq [2019/08/14 11:36] (current) – goran.kocjancic
@@ Line 6: / Line 6: @@
 ??? Can I connect a water detector for leakages?
-A water detector features digital output and can be connected to a free input on [[en:hiq_home:hardware:lc-10-iq|LC-10-IQ light controller]]. \\
+A water detector features digital output and can be connected to a free input on [[en:hiq_hw:lc-10-iq|LC-10-IQ light controller]]. \\
 Indication may be transmitted on one (or all) of the following ways:
   * The appropriate output can be connected to actuator which closes the water in the whole house/apartment.
@@ Line 28: / Line 28: @@
 ??? I have an oil heater. During the transitional period (in spring and autumn) I would like that it operates only for one hour in the morning and for two hours in the evening. What kind of custom programming do I need?
-No additional programming is needed. You should connect the oil heater power supply to one of free outputs on [[en:hiq_home:hardware:lc-10-iq|LC-10-IQ light controller]]. Then you use a free timetable in [[en:hiq_home:applications:configurator|HIQ configurator]] and set appropriate output (or you combine it with a scene and/or thermostat-s).
+No additional programming is needed. You should connect the oil heater power supply to one of free outputs on [[en:hiq_hw:lc-10-iq|LC-10-IQ light controller]]. Then you use a free timetable in [[en:hiq_home:applications:configurator|HIQ configurator]] and set appropriate output (or you combine it with a scene and/or thermostat-s).