Differences

This shows you the differences between two versions of the page.

--- en:hiq_hw:mc3-24 [2020/07/15 08:50] – [Technical specification] alen.mejak
+++ en:hiq_hw:mc3-24 [2023/01/24 15:13] (current) – [Technical specification] saso_santelj
@@ Line 38: / Line 38: @@
 ===== Technical specification =====
-|< 35% 40% >|
+|< 42% 45% >|
-| System clock                 |                               100MHz      |
+| System clock                 |                               100MHz|
 | Instruction execution        |                      10ns per instruction |
 | Program memory               |                    896Kb for user program |
@@ Line 47: / Line 47: @@
 | Digital input (ix00..ix11)   |     24V 7mA, opto isolated, bidirectional |
 | Digital input (ix12..ix15)   |     dry contact, internal pull-up 12V 3mA |
-| Digital output (qx00..qx09)  |     drelay 8A/250VAC or 8A/30VDC resistive|
+| Digital output (qx00..qx09)  |      relay 8A/250VAC or 8A/30VDC resistive|
-| Digital output (qx12..qx15)  |     NPN transistor 30V 1A                 |
+| Digital output (qx12..qx15)  |     NPN transistor 30V 1A|
-| IEX-2 bus load               |     48 modules (Cybro + 47 IEX-2)         |
+| IEX-2 bus load               |     48 modules (Cybro + 47 IEX-2)|
-| IEX-2 baud rate              |     20, 50, 100 (default), 250, 500kbps   |
+| IEX-2 baud rate              |     20, 50, 100 (default), 250, 500kbps|
-| IEX-2 cable length, 100kbps  |     100m (non-terminated)                 |
+| IEX-2 cable length, 100kbps  |     100m (non-terminated)|
-| IEX-2 cable length, 100kbps  |     300m (terminated)                     |
+| IEX-2 cable length, 100kbps  |     300m (terminated)|
-| IEX-2 cable length, 50kbps   |     500m (terminated)                     |
+| IEX-2 cable length, 50kbps   |     500m (terminated)|
-| Power supply                 |     24V (18..28V)                         |
+| Power supply                 |     24V (18..28V)|
-| Power consumption            |50mA (no load), 180mA (10 relays, 4x 10Vout) |
+| Power consumption            |  50mA (no load), 180mA (10 relays, 4x 10Vout)|
-| Power output (IEX-2)         |     24V 2A (limited by resettable fuse)   |
+| Power output (IEX-2)         |     24V 2A (limited by resettable fuse)|
-| Operating conditions         |     0..50°C, 0..85% rh non-condensing     |
+| Operating conditions         |     0..50°C, 0..85% rh non-condensing|
-| Degree of protection         |     IP20                                  |
+| Degree of protection         |     IP20|
-| Installation category        |     III                                   |
+| Installation category        |     III|
 ===== Terminals =====
+{{en:hiq_hw:pasted:mc-24-05terminals.png}}