Differences

This shows you the differences between two versions of the page.

--- en:hiq_hw:pm-1-iq [2019/07/24 06:39] – ↷ Page moved from en:hiq_home:hardware:pm-1-iq to en:hiq_hw:pm-1-iq goran.kocjancic
+++ en:hiq_hw:pm-1-iq [2019/08/14 11:08] (current) – removed goran.kocjancic
@@ Line 1: / Line 1: @@
-====== Power Meter Set ======
-**Single phase direct connection power meter set**
-<WRAP column 350px>
-{{  hiq_hardware:pm-1-iq.png?nolink  }}
-</WRAP>
-<WRAP column 300px>
-| Model number: ^ PM-1-IQ                             |
-| Mounting:     | DIN rail, 1+2M, 18+36 mm            |
-| Dimensions:   | 18+36 × 62 × 119 mm                 |
-===== Applications =====
-  * Digital multi-function energy meter for single phase networks
-</WRAP>
-<WRAP clear></WRAP>
-===== Features =====
-  * DIN rail mounting with direct connection up to 45A
-  * Compact design in a single module 18mm wide
-  * Seal-able cover(phase and neutral terminals)
-  * Measuring kWh, V, A, P, F, PF, etc
-===== General description =====
-The PM-1-IQ series is an advanced single phase energy monitoring solution with built-in configuration push button and LCD data displaying, particularly indicated for active energy and other parameters metering and for cost allocation. Housing for DIN-rail mounting,IP51 protection degree, direct connection up to max 45A.
-<WRAP pagebreak></WRAP>
-===== Technical specifications =====
-| Nominal voltage(Un)           |           230 VAC|
-| Operational voltage           |         176-276 V|
-| Insulation capabilities                         ||
-| - AC voltage withstand        | 4 KV for 1 minute|
-| - Impulse voltage withstand   |       6 kV-1.2 µS|
-| Basic current (Ib)            |               5 A|
-| Maximum rated current (Imax)  |              45 A|
-| Operational current range     |      0.4% Ib-Imax|
-| Over current withstand        |20 Imax for 0.01 s|
-| Operational frequency range   |       50 or 60 Hz|
-| Internal power consumption    |       ≤ 2 W/10 VA|
-| Communication type            |RS485(semi-duplex)|
-| Communication protocol        |Modbus RTU        |
-| Pulse output 1                |configurable      |
-| Pulse output 2                |      1000 imp/kWh|
-| Max reading                   |       99999.9 kWh|
-===== SDM120 Terminals =====
-<WRAP column 75%>
-| Neutral          ^  N    ^   3  | Loads neutral  |    | Live in              ^  1  ^  L {{hiq_hardware:up.png?nolink |}}       | Loads live                   |
-| :::              ^  :::  ^   4  | :::            |::: | Live out             ^  2  ^  L {{hiq_hardware:dn.png?nolink |}}       | Loads power supply           |
-|                  ^  GND  ^   8  | RS485          |::: | Pulse output 1       ^  5  ^  + {{hiq_hardware:pulse.png?nolink|}} 2   | NC                           |
-| CAD-232-A2-IQ B  ^   B   ^   9  | :::            |::: | Pulse output common  ^  6  ^  - {{hiq_hardware:pulse.png?nolink|}}     | :::                          |
-| CAD-232-A2-IQ A  ^   A   ^  10  | :::            |::: | Pulse output 1       ^  7  ^  + {{hiq_hardware:pulse.png?nolink|}} 1   | :::                          |
-</WRAP>
-<WRAP column 20%>
-{{  hiq_hardware:sdm120c-io.png?nolink}}
-</WRAP>
-<WRAP clear></WRAP>
-{{ hiq_hardware:eastron_sdm120-modbus_user_manual_2016_v2_6.pdf | SDM120C user manual}}
-{{ hiq_hardware:sdm220modbus_protocol_v1.1.pdf | SDM 120C Modbus protocol}}
-<WRAP pagebreak></WRAP>