User Tools

Site Tools


en:hiq_hw:pm-3-iq

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
en:hiq_hw:pm-3-iq [2019/07/24 06:39] – ↷ Page moved from en:hiq_home:hardware:pm-3-iq to en:hiq_hw:pm-3-iq goran.kocjancicen:hiq_hw:pm-3-iq [2019/08/14 11:08] (current) – removed goran.kocjancic
Line 1: Line 1:
-====== Power Meter Set ====== 
- 
-**Three phase power meter set** 
- 
-<WRAP column 350px> 
- 
-{{  hiq_hardware:pm-3-iq.jpg?nolink250  }} 
- 
- 
-</WRAP> 
- 
-<WRAP column 300px> 
- 
-| Model number: ^ PM-3-IQ                             | 
-| Mounting:     | DIN rail, 4+2M, 76+36 mm            | 
-| Dimensions:   |36 × 62 × 119 mm                                  |  
-|:::| 76 × 66 × 100 mm                                  |  
- 
-===== Applications ===== 
- 
-  * Digital multi-function energy meter for single or 3-phase networks 
- 
-</WRAP> 
- 
-<WRAP clear></WRAP> 
- 
-===== Features ===== 
- 
-  * DIN rail mounting with direct connection up to 100A 
-  * Compact design in a 4 module, 76mm wide 
-  * Sealable cover(phase and neutral terminals) 
-  * Measuring kWh, V, A, P, F, PF, Hz, etc 
- 
-===== General description ===== 
- 
-The PM-3-IQ series is an advanced 3-phase energy monitoring solution with built-in configuration push button and LCD data displaying, particularly indicated for active energy and other parameters metering and for cost allocation. Housing for DIN-rail mounting, IP20 protection degree, direct connection up to max 100A. 
- 
-The unit can measure and display: 
-  * Line voltage and THD% (total harmonic distortion) of all phases 
-  * Line frequency 
-  * Currents, current demands and current THD% of all phases 
-  * Power, maximum power demand and power factor 
-  * Active energy, imported and exported 
-  * Reactive energy, imported and exported 
- 
-<WRAP pagebreak></WRAP> 
-\\ 
- 
-===== Technical specifications ===== 
- 
-| Phase to neutral voltages               100-289VAC| 
-| Voltages between phases                 173-500VAC| 
-| Power connector                   25mm<sup>2</sup>        
-| Basic current (Ib)            |                 10 A| 
-| Maximum rated current (Imax)  |                100 A| 
-| Operational frequency range            50 or 60 Hz| 
-| Internal power consumption    |           <2 W/10 VA| 
-| Communication type            |   RS485(semi-duplex)| 
-| Communication protocol        |           Modbus RTU| 
-| Pulse output 1                |         configurable| 
-| Pulse output 2                |          400 imp/kWh| 
-| Max reading                          999999.99 kWh| 
-| Accuracy:                     || 
-| Voltage                        0.5% of range maximum| 
-| Current                              0.5% of nominal| 
-| Frequency                      0.2% of mid-frequency| 
-| Active energy (Wh)            |   Class 1 IEC 62053-21| 
-\\ 
-===== SDM630DC Terminals ===== 
- 
-<WRAP column 70%> 
-| Phase 1 IN          ^  L1{{hiq_hardware:up.png?nolink }}    ^    | Loads IN    |    | Pulse output 2 -      2- {{hiq_hardware:pulse.png?nolink|}}    8   ^   
-| Phase 2 IN          ^  L2{{hiq_hardware:up.png?nolink }}    ^    | :::         |::: | COM-PMI A            ^  A                                      ^  9    
-| Phase 3 IN          ^  L3{{hiq_hardware:up.png?nolink }}    ^    | :::         |::: | COM-PMI B            ^  B                                      ^  10  ^  
-| Neutral              N                                      | :::         |::: | Pulse output 2 +      2+ {{hiq_hardware:pulse.png?nolink|}}    11  ^   
-| Phase 1 OUT          L1{{hiq_hardware:dn.png?nolink }}    ^    | Loads OUT   |::: | Pulse output 1 -      1- {{hiq_hardware:pulse.png?nolink|}}    12  ^   
-| Phase 2 OUT          L2{{hiq_hardware:dn.png?nolink }}    ^    | :::         |::: | Pulse output 1 +      1+ {{hiq_hardware:pulse.png?nolink|}}    13  ^   
-| Phase 3 OUT          L3{{hiq_hardware:dn.png?nolink }}    ^    | :::         |::: |                              | 
- 
-</WRAP> 
-<WRAP clear></WRAP> 
-<WRAP pagebreak></WRAP> 
-\\ 
-\\ 
-===== SDM630DC Connection ===== 
-<WRAP column 30%> 
-**Three phase, four wires** \\ 
-{{hiq_hardware:sdm630_four.png?200}} 
-</WRAP> 
-<WRAP column 30%> 
-**Three phase, three wires** \\ 
-{{hiq_hardware:sdm630_three.png?230}} 
-</WRAP> 
-<WRAP column 30%> 
-**Single phase, two wires** \\ 
-{{hiq_hardware:sdm630_two.png?210}} 
-</WRAP> 
-<WRAP clear></WRAP> 
-<WRAP pagebreak></WRAP> 
- 
-===== Manual ===== 
- 
-Download complete {{hiq_hardware:eastron-sdm630-dc-user-manual.pdf| User Manual.}} 
  
en/hiq_hw/pm-3-iq.1563950352.txt.gz · Last modified: 2019/07/24 06:39 by goran.kocjancic