Differences

This shows you the differences between two versions of the page.

--- en:hiq_hw:pm1-wn [2019/08/20 09:06] – goran.kocjancic
+++ en:hiq_hw:pm1-wn [2019/08/20 09:07] (current) – removed goran.kocjancic
@@ Line 1: / Line 1: @@
-====== Wireless DIN rail power meter ======
-**Wireless DIN rail power meter, external power relay switching and consumer measurement**
-<WRAP column 350px>
-{{ hiq_energy:goflex_hems:hardware:pm1-d.png?nolink |}}
-</WRAP>
-<WRAP column 300px>
-| Model number: ^ PM1-WN-D                      |
-| Mounting:     | DIN rail, 4M                  |
-| Dimensions:   | 72 × 110 × 60 mm              |
-^ Used for single phase managed consumer                           ||
-| ✔ | toggling power supply using external power relay              |
-| ✔ | measuring power and energy using clamp-on current transformer |
-</WRAP>
-<WRAP clear></WRAP>
-===== Features =====
-  * Wireless load management, external power-relay control
-  * Consumer measurements, clamp-on current transformer
-===== General description =====
-Wireless DIN rail power meter PM1-WN-D is a DIN rail mounted control unit. It can switch on/off an external power-relay and measure active power and energy consumption.
-This device has to be directly and continuously main powered. For network purposes, it is a Router (Repeater) i.e. it has function of maintaining radio traffic from and to other similar devices and it can also act as a parent device for battery-powered sensors of the same family.
-<WRAP pagebreak></WRAP>
-===== Technical specifications =====
-|< 35% 40% >|
-| POWER SUPPLY                  |                85-250 Vac; 50/60 Hz |
-| WIRELESS CHARACTERISTICS      |                 2405 MHz ÷ 2480 MHz |
-| :::                           |                     DSSS Modulation |
-| :::                           |    Nominal transmission Power +3dBm |
-| :::                           |             IEEE 802.15.4 compliant |
-| :::                           |                Stack EmberZNet3.5.x |
-| :::                           |                     Stack version 0 |
-| :::                           |              Proprietary profile ID |
-| :::                           |          Proprietary encryption key |
-| MEASURES                      |                Energy consumed [Wh] |
-| :::                           |                    Active Power [W] |
-| :::                           |           Time of measurement [sec] |
-| MAXIMUM LOAD                  |                               15 kW |
-| RELAY CHARACTERISTICS         |  Contacts 10A 250V (resistive load) |
-| CONNECTIONS                   |                     Terminal blocks |
-| OPERATING CONDITIONS          |                         -10 + 55 °C |
-| PROTECTION CLASS              |                                IP30 |
-===== Terminals =====
-<WRAP column 350px>
-|< 100% 23% 10% 33% 33% >|
-^    PM1-WN-D           ||                                           ||
-| MAINS          |   16  ^ Power source         |    L                |
-| :::            |   17  | :::                  |    N                |
-| CT             |   2   ^ Current transformer  |  black              |
-| :::            |   3   | :::                  |  red                |
-| Relay          |   6   ^ Power relay          |  coil power supply  |
-| :::            |   7   | :::                  |  coil               |
-</WRAP>
-<WRAP column 300px>
-{{ hiq_energy:goflex_hems:hardware:pm1-d_terminals.png?nolink |}}
-</WRAP>
-<WRAP clear></WRAP>
-===== Connection =====
-{{ hiq_energy:goflex_hems:hardware:pm1-d_wiring.png?nolink |}}