Differences

This shows you the differences between two versions of the page.

--- en:hiq_hw:pm1-wn-d [2019/08/20 09:06] – removed goran.kocjancic
+++ en:hiq_hw:pm1-wn-d [2019/08/21 09:38] (current) – goran.kocjancic
@@ Line 1: / Line 1: @@
+====== Wireless DIN rail power sensor ======
+**Wireless DIN rail power meter, external power relay switching and consumer measurement**
+<WRAP column 350px>
+{{ hiq_energy:goflex_hems:hardware:pm1-d.png?nolink |}}
+</WRAP>
+<WRAP column 300px>
+| Model number: ^ PM1-WN-D                      |
+| Mounting:     | DIN rail, 4M                  |
+| Dimensions:   | 72 × 110 × 60 mm              |
+^ Used for single phase managed consumer                           ||
+| ✔ | toggling power supply using external power relay              |
+| ✔ | measuring power and energy using clamp-on current transformer |
+</WRAP>
+<WRAP clear></WRAP>
+===== Features =====
+  * Wireless load management, external power-relay control
+  * Consumer measurements, clamp-on current transformer
+===== General description =====
+Wireless DIN rail power meter PM1-WN-D is a DIN rail mounted control unit. It can switch on/off an external power-relay and measure active power and energy consumption.
+This device has to be directly and continuously main powered. For network purposes, it is a Router (Repeater) i.e. it has function of maintaining radio traffic from and to other similar devices and it can also act as a parent device for battery-powered sensors of the same family.
+<WRAP pagebreak></WRAP>
+===== Technical specifications =====
+|< 35% 40% >|
+| POWER SUPPLY                  |                85-250 Vac; 50/60 Hz |
+| WIRELESS CHARACTERISTICS      |                 2405 MHz ÷ 2480 MHz |
+| :::                           |                     DSSS Modulation |
+| :::                           |    Nominal transmission Power +3dBm |
+| :::                           |             IEEE 802.15.4 compliant |
+| :::                           |                Stack EmberZNet3.5.x |
+| :::                           |                     Stack version 0 |
+| :::                           |              Proprietary profile ID |
+| :::                           |          Proprietary encryption key |
+| MEASURES                      |                Energy consumed [Wh] |
+| :::                           |                    Active Power [W] |
+| :::                           |           Time of measurement [sec] |
+| MAXIMUM LOAD                  |                               15 kW |
+| RELAY CHARACTERISTICS         |  Contacts 10A 250V (resistive load) |
+| CONNECTIONS                   |                     Terminal blocks |
+| OPERATING CONDITIONS          |                         -10 + 55 °C |
+| PROTECTION CLASS              |                                IP30 |
+===== Terminals =====
+<WRAP column 350px>
+|< 100% 23% 10% 33% 33% >|
+^    PM1-WN-D           ||                                           ||
+| MAINS          |   16  ^ Power source         |    L                |
+| :::            |   17  | :::                  |    N                |
+| CT             |   2   ^ Current transformer  |  black              |
+| :::            |   3   | :::                  |  red                |
+| Relay          |   6   ^ Power relay          |  coil power supply  |
+| :::            |   7   | :::                  |  coil               |
+</WRAP>
+<WRAP column 300px>
+{{ hiq_energy:goflex_hems:hardware:pm1-d_terminals.png?nolink |}}
+</WRAP>
+<WRAP clear></WRAP>
+===== Connection =====
+{{ hiq_energy:goflex_hems:hardware:pm1-d_wiring.png?nolink |}}