Differences

This shows you the differences between two versions of the page.

--- en:hiq_hw:pm3-e-d [2022/11/30 09:30] – gdzampo
+++ en:hiq_hw:pm3-e-d [2022/12/09 08:58] (current) – saso_santelj
@@ Line 5: / Line 5: @@
 <WRAP column 350px>
-{{  :hiq_energy:hems:hardware:pm3-e-d_ct.png?nolink  |}}
+{{  hiq_hardware:pm3-e-d_picture.png?nolink  |}}
 </WRAP>
@@ Line 40: / Line 40: @@
   * Active energy imported and exported
   * Reactive energy imported and exported
-  * Supported Modbus (SDM630Modbus)
+  * Supported Modbus
@@ Line 46: / Line 46: @@
 ===== General description =====
-SDM630 series measures and displays the characteristics of 1p2w, 3p3w and 3p4w supplies, including voltage, frequency, current, power, active and reactive energy, imported or exported, harmonic etc. Bi-directional measurement makes it an ideal choice for Solar PV measurement. The units support Max. 100A direct connection, saving the cost and avoiding the trouble to connect external CTs. Two pulse outputs and 1 communication port (Mbus/Modbus) are provided for remote monitoring. The unit has been approved to meet the requirements of EU Directive 2014/32/EU.
+PM3-E-D measures and displays the characteristics of 1p2w, 3p3w and 3p4w supplies, including voltage, frequency, current, power, active and reactive energy, imported or exported, harmonic etc. Bi-directional measurement makes it an ideal choice for Solar PV measurement. The units support Max. 100A direct connection, saving the cost and avoiding the trouble to connect external CTs. Two pulse outputs and 1 communication port (Modbus) are provided for remote monitoring. The unit has been approved to meet the requirements of EU Directive 2014/32/EU.
 ===== Technical specifications =====
@@ Line 57: / Line 57: @@
 | Mounting                       |                         DIN rail (DIN 43880) |
 | Sealing                        |                                  IP51 Indoor |
-| Frequency                      |                            50Hz or 60Hz      |
+| Frequency                      |                                 50Hz or 60Hz |
 | Power Consumption              |                                        ≤ 10W |
 ^ Accuracy                                                                     ||
-| Voltage, Current               |                                         0.5% |
+| Voltage, Current               |                        0.2% of range maximum |
-| Frequency                      |                        0.2% of Mid-Frequency |
+| Frequency                      |                        0.1% of Mid-Frequency |
 | Power Factor                   |                           1% of Unity (0.01) |
-| Active Power, Apparent Power   |                        ± 1% of Range Maximum |
-| Reactive Power                 |                        ± 1% of Range Maximum |
-| Reactive Energy (Varh)         |                        ± 1% of Range Maximum |
-| Active Energy (Wh)             |                          Class 1 IEC 62053-21|
 ^ Current transformer                                                          ||
 | Frequency                      |                                     50-60 Hz |
 | Max current                    |                                        100 A |
 ^ Modbus                                                                       ||
-| Transmission Mode              |                           RS485 Half-Duplex  |
+| Transmission Mode              |                            RS485 Half-Duplex |
 | Protocol                       |                                   Modbus RTU |
 | Baud Rate                      |                           2400bps - 38400bps |
@@ Line 80: / Line 76: @@
-<WRAP pagebreak></WRAP>
-===== Dimensions =====
-{{:hiq_energy:hems:hardware:pm3-e_ct_dimensions.png?nolink|}}
-===== Installation =====
-{{:hiq_energy:hems:hardware:pm3-e_instalation.png?nolink|}}
-{{ :hiq_energy:hems:hardware:hiq_pm3-e-d-ct_user_manual_v1.pdf |}} {{ :hiq_energy:hems:hardware:hiq_pm3-e-d-ct_protocol_v1.6.pdf |}}
+<WRAP pagebreak></WRAP>
+===== Installation & Dimensions =====
+{{:hiq_hardware:sdm630-installation.png?nolink|}}