User Tools

Site Tools


en:hiq_hw:rl1-wn

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

en:hiq_hw:rl1-wn [2019/07/25 12:26] – created goran.kocjancicen:hiq_hw:rl1-wn [2019/08/20 09:09] (current) goran.kocjancic
Line 1: Line 1:
 ====== Wireless relay ====== ====== Wireless relay ======
 +
 +**Single-phase power relay and consumer measurement**
 +
 +<WRAP column 350px>
 +
 +{{ hiq_energy:goflex_hems:hardware:rl1.png?nolink |}}
 +
 +</WRAP>
 +
 +<WRAP column 300px>
 +
 +| Model number: ^ RL1-WN-W                      |
 +| Mounting:     | On wall                       |
 +| Dimensions:   | 76 × 116 × 25 mm              | 
 +
 +^ Used for single phase managed consumer    ||
 +| ✔ | toggling power supply                 |
 +| ✔ | measuring power and energy            |
 +
 +</WRAP>
 +
 +<WRAP clear></WRAP>
 +
 +===== Applications =====
 +
 +  * Wireless power-relay with consumer measurements
 +
 +===== Features =====
 +
 +  * Wireless load management
 +  * Consumer measurements
 +
 +===== General description =====
 +
 +Wireless relay RL1-WN-W is a wall mounted control unit. It can switch on/off an electric load, measure active power and energy consumption. 
 +
 +This device has to be directly and continuously main powered. For network purposes, it is a Router (Repeater) i.e. it has function of maintaining radio traffic from and to other similar devices and it can also act as a parent device for battery-powered sensors of the same family.
 +
 +<WRAP pagebreak></WRAP>
 +
 +===== Technical specifications =====
 +
 +|< 35% 40% >|
 +| POWER SUPPLY                  |                85-250 Vac; 50/60 Hz |
 +| WIRELESS CHARACTERISTICS      |                 2405 MHz ÷ 2480 MHz |
 +| :::                                               DSSS Modulation |
 +| :::                              Nominal transmission Power +3dBm |
 +| :::                                       IEEE 802.15.4 compliant |
 +| :::                                          Stack EmberZNet3.5.x |
 +| :::                                               Stack version 0 |
 +| :::                                        Proprietary profile ID |
 +| :::                                    Proprietary encryption key |
 +| MEASURES                      |                Energy consumed [Wh] |
 +| :::                                              Active Power [W] |
 +| :::                                     Time of measurement [sec] |
 +| RELAY CHARACTERISTICS          Contacts 10A 250V (resistive load) |
 +| CONNECTIONS                                       Terminal blocks |
 +| OPERATING CONDITIONS          |                         -10 + 55 °C |
 +| PROTECTION CLASS              |                                IP30 |
 +
 +===== Terminals =====
 +
 +<WRAP column 350px>
 +
 +|< 100% 25% 4% 4% 33% >|
 +^    RL1-WN-W                  ||^   Power source    Consumer  |
 +| PE              PE           PE               /      |
 +| :::            |  PE     1a  |     /            |     PE     |
 +| Neutral        |  N    |                    |     /      |
 +| :::            |  N    |   2a  |     /            |          |
 +| Phase IN        L    |                    |     /      |
 +| Phase OUT      |  L    |   3a  |     /            |          |
 +| Not used        L    |   3b  |     /            |     /      |
 +
 +</WRAP>
 +
 +<WRAP column 300px>
 +
 +{{ hiq_energy:goflex_hems:hardware:rl1_terminals.png?nolink |}}
 +
 +</WRAP>
 +<WRAP clear></WRAP>
 +
 +===== Connection =====
 +
 +{{ hiq_energy:goflex_hems:hardware:rl1_wiring.png?nolink&500 |}}
  
en/hiq_hw/rl1-wn.1564057599.txt.gz · Last modified: 2019/07/25 12:26 by goran.kocjancic