User Tools

Site Tools

Trace: • lp
en:hiq_hw:wm-1

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
en:hiq_hw:wm-1 [2022/12/02 13:45] – [Installation and mounting] saso_santeljen:hiq_hw:wm-1 [2022/12/02 13:48] (current) – [Create new secure group] saso_santelj
Line 77: Line 77:
 {{ hiq_hardware:wm1_serial.png?nolink&0x500  }} {{ hiq_hardware:wm1_serial.png?nolink&0x500  }}
  
-===== Radio pairing configuration =====+===== Wireless binding =====
  
 ==== Create new secure group ==== ==== Create new secure group ====
      
-  * turn on all devices as the same time+  * turn on all devices at the same time
   * within 10 seconds, while RF LED is blinking, press and hold button on one of the devices   * within 10 seconds, while RF LED is blinking, press and hold button on one of the devices
   * after a second, the new address is randomly generated and sent to all devices. RF LED will blink 3 times to confirm the new address.   * after a second, the new address is randomly generated and sent to all devices. RF LED will blink 3 times to confirm the new address.
en/hiq_hw/wm-1.1669988720.txt.gz · Last modified: 2022/12/02 13:45 by saso_santelj