Differences

This shows you the differences between two versions of the page.

--- en:hotel:hardware:lud12-iq [2019/07/24 06:39] – ↷ Links adapted because of a move operation goran.kocjancic
+++ en:hotel:hardware:lud12-iq [2019/08/14 11:11] (current) – removed goran.kocjancic
@@ Line 1: / Line 1: @@
-====== Light dimmer ======
-**Universal 230 VAC light driver**
-<WRAP column 350px>
-{{  hiq_hardware:lud-12.png?nolink  }}
-</WRAP>
-<WRAP column 300px>
-| Model number: ^ LUD12-IQ               |
-| Connects to:  | [[en:hiq_hw:ld-p4-iq|LD-P4-IQ]] |
-| Mounting:     | DIN rail, 1M, 18 mm      |
-| Dimensions:   | 18 × 63 × 87 mm          |
-===== Applications =====
-  * Dimming all 230 VAC dimmable lights
-</WRAP>
-<WRAP clear></WRAP>
-===== Features =====
-  * Automatic load detection
-  * Electronic overload protection
-  * Over-temperature shutdown
-===== General description =====
-Activation takes place from the [[en:hiq_hw:ld-p4-iq|LD-P4-IQ]]. The output voltage is adjusted from 0-100% depending on the [[en:hiq_hw:ld-p4-iq|LD-P4-IQ]] command.
-The activation terminals X1/X2 in the LUD12 are isolated from the mains voltage by an optocoupler.
-Automatic load detection, electronic overload protection and over-temperature shutdown are active and independent from activation.
-<WRAP pagebreak></WRAP>
-===== Technical specifications =====
-| Supply voltage                   |                                             230 VAC|
-| Output power:                                                                        ||
-| Incandescent lamps 230V (R)      |                                               400 W|
-| Halogen lamps 230V (R)           |                                               400 W|
-| Inductive transformers (L)       |                                               400 W|
-| Capacitive transformers (C)      |                                               400 W|
-| Dimmable energy saving lamps ESL |                                               400 W|
-| Dimmable 230V LED lamps          |                                               400 W|
-| Parameters for PWM activation:                                                       ||
-| Frequency:                       |                                               100Hz|
-| Duty cycle:                      |  0 (= OFF) linear up to 90% (= full output voltage)|
-| Level:                           |                       10-24 volts (e.g. PLC output)|
-| Activation current:              |                              1mA (10V) to 3mA (24V)|
-| Connection polarity:             |  X1 = +, X2 = - (GND), polarity reversal protection|
-| Isolation:                       |                                      by optocoupler|
-===== Terminals =====
-| LD-P4-IQ common ^  X1  | PWM intput || Light output               ^ {{  hiq_hardware:l.png?nolink  |}} | Lamp live                     |
-| LD-P4-IQ output ^  X2  | :::        || Light power supply live    ^  L                              | Lights power supply           |
-|                 ^      |            || Light power supply neutral ^  N                              | Neutral power supply and lamp |