Differences

This shows you the differences between two versions of the page.

--- en:ms_main:hiq_lighting:introduction [2020/04/18 09:18] – marjan_strnad
+++ en:ms_main:hiq_lighting:introduction [2020/04/25 15:53] (current) – removed marjan_strnad
@@ Line 1: / Line 1: @@
-====== HIQ Lighting Control – HIQ LCS Introduction ======
-HIQ LCS is a system of integrated devices and software that is targeted for lighting automation.
-The primary function is control and management of any lights – on/off, dimmable, LED RGB, LED stripes using local wired or wireless push or touch buttons, Wi-Fi tablets, Mobile phones or BMS/SCADA monitoring and control. Lights can be controlled by scenarios, scheduled, by motion sensors using direct relay modules, DALI, DSI or PWM/Triac dimmable and LED stripes. Although the basic concept of HIQ LCS is simple, the possibility to extend current capabilities or add new is unlimited.
-===== LCS Controller =====
-It consists of an LCS controller ([[en:hiq_hw:mc-230|MC-230]]).
-<WRAP pagebreak></WRAP>
-===== Field Input Devices =====
-Field Input Devices can be:
-  * **any push buttons** on binary inputs of Master controller or any other IEX module (DIN rail mount, flush mount or field device)
-  * **touch buttons** on Modbus port of Master controller
-  * **EnOcean wireless Wall buttons or Soft remote ** on EnOcean receiver of Master controller or IEX-2 EnOcean receiver for switches
-  * **Scene panel** on IEX bus
-  * **Motion sensors** on binary inputs of Master controller or any other IEX module (DIN rail mount, flush mount or field device)
-  * **EnOcean wireless Motion sensors ** on EnOcean receiver of Master controller or IEX-2 EnOcean receiver for switches
-===== Power relays =====
-Are used for control of managed consumers. Power relays are toggling power supply or enabling signal for the operation of the device. They are controlled directly from HEMS master controller [[en:hiq_hw:mc-230|MC-230]].
-===== Push buttons =====
-Are used for manual control of managed devices. Push buttons are directly wired to HEMS master controller [[en:hiq_hw:mc-230|MC-230]].
-{{:en:ms_main:hiq_lighting:lcs_modules_schematic.png|}}