Differences

This shows you the differences between two versions of the page.

--- en:robotina_charger:commissioning:safety [2022/12/12 09:13] – created gdzampo
+++ en:robotina_charger:commissioning:safety [2022/12/20 08:13] (current) – removed gdzampo
@@ Line 1: / Line 1: @@
-====== SAFETY INSTRUCTIONS ======
-Use the following safety guidelines to ensure your own personal safety and to protect your equipment and working environment from potential damage.
-**NOTICE**: All applicable local and national codes that regulate the installation and operation of the equipment must be strictly followed.
-**NOTICE**: Installation and electrical connection of the equipment must be carried out by qualified and authorized personnel.
-----
-Notices which require special attention are highlighted with following symbols:
-  * {{:en:hems:methods_resources:warning.png?nolink|}} **WARNING** - which indicates that death, severe personal injury or substantial property damage can result if proper precautions are not taken.
-  * {{:en:hems:methods_resources:warning.png?nolink|}} **CAUTION** - which indicates that minor to medium personal injury or property damage can result if proper precautions are not taken.
-----
-This product can only function correctly if it is transported, stored, set up and installed correctly, and operated and maintained as recommended according to manufacturer’s instructions.
-{{:en:hems:methods_resources:warning.png?nolink|}} **WARNING**: Failure to comply with manufacturer’s safety and installation instructions or applicable codes and standards can result in damage to equipment or serious injury to personnel.
-{{:en:hems:methods_resources:warning.png?nolink|}} **WARNING**: Before installing, servicing or repairing electrical equipment power source must be disconnected.
-{{:en:hems:methods_resources:warning.png?nolink|}} **CAUTION**: Don’t try to open the device, any interference or change may impact device’s properties and significantly affect safety.
-  * The device must be installed inside electrical enclosure where it cannot endanger people or environment.
-  * During operation, device must not be exposed to high temperature, high humidity, excessive dust, corrosive gases, vibration or shock.
-  * All connected wires must comply with manufacturer's specifications.
-  * For installation use only tools and equipment with non-conducting handles.
-  * Sufficient ventilation space has to be assured around device for proper operation.
-  * The manufacturer does not undertake any liability for material or personal damage resulting from use or handling which is not in accordance with the manufacturer's safety instructions.