User Tools

Site Tools

Trace:
en:sg3

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
en:sg3 [2020/11/27 10:56] – created goran.kocjancicen:sg3 [2020/11/27 11:03] (current) – [Configurator] goran.kocjancic
Line 19: Line 19:
 It allows easy complete adaptation to actual needs, both during installation and later during use. It allows easy complete adaptation to actual needs, both during installation and later during use.
  
-[[sg3:installations|]]+[[en:sg3:installations|]]
  
-{{sg3:sg3.png|}}+{{:en:sg3:sg3.png?nolink|}}
  
 ===== Temperature scanner ===== ===== Temperature scanner =====
Line 43: Line 43:
 It is used when the entrance and exit from the controlled area are common and up to 3 m wide. The sensors can be mounted on the left or right side of the post during installation. When the post cannot be installed directly at the entry / exit, the sensor can be mounted on a special bracket. It is used when the entrance and exit from the controlled area are common and up to 3 m wide. The sensors can be mounted on the left or right side of the post during installation. When the post cannot be installed directly at the entry / exit, the sensor can be mounted on a special bracket.
  
-{{sg3:passage_bidirectional.png?nolink|}}+{{:en:sg3:passage_bidirectional.png?nolink|}}
  
 ==== 2 × one-way TOF photo sensors ==== ==== 2 × one-way TOF photo sensors ====
Line 49: Line 49:
 It is used when the entrance and exit from the controlled area are separate and up to 3 m wide each. The sensors can be mounted on the left and right sides of the post during installation. When the post cannot be installed directly between entry and exit, the sensor can be mounted on a special bracket. It is used when the entrance and exit from the controlled area are separate and up to 3 m wide each. The sensors can be mounted on the left and right sides of the post during installation. When the post cannot be installed directly between entry and exit, the sensor can be mounted on a special bracket.
  
-{{sg3:passage_2_x_one-way.png?nolink|}}+{{:en:sg3:passage_2_x_one-way.png?nolink|}}
  
 ==== Advanced TOF passage sensor ==== ==== Advanced TOF passage sensor ====
Line 55: Line 55:
 In cases where it is not possible to detect passages reliably enough or a very accurate count of users is required, an advanced TOF sensor can be used. The sensor is placed under the ceiling by monitoring the inputs and outputs of the room. The TOF sensor can be easily configured to cover even very complex transitions. It is also possible to connect several sensors where the transitions are very wide or there are several. In cases where it is not possible to detect passages reliably enough or a very accurate count of users is required, an advanced TOF sensor can be used. The sensor is placed under the ceiling by monitoring the inputs and outputs of the room. The TOF sensor can be easily configured to cover even very complex transitions. It is also possible to connect several sensors where the transitions are very wide or there are several.
  
-{{sg3:tof_sensor.png?nolink&300|}}+{{:en:sg3:tof_sensor.png?nolink&300|}}
  
 ===== Multi-color status light & internal beeper ===== ===== Multi-color status light & internal beeper =====
Line 83: Line 83:
   * forced door opening (long press).   * forced door opening (long press).
  
-{{sg3:wireless_button.png?nolink&200|}}+{{:en:sg3:wireless_button.png?nolink&200|}}
  
 ===== Wireless gate module ===== ===== Wireless gate module =====
Line 89: Line 89:
 Allows wireless door opening. Allows wireless door opening.
  
-{{sg3:rs2-we-f2.jpg?direct|}}+{{:en:sg3:rs2-we-f2.jpg?direct|}}
  
 ===== Wireless alarm socket ===== ===== Wireless alarm socket =====
Line 99: Line 99:
   * scanning the wrong code (blink)   * scanning the wrong code (blink)
  
-{{sg3:wireless_plug.png?nolink|}}+{{:en:sg3:wireless_plug.png?nolink|}}
  
 ===== LED Display ===== ===== LED Display =====
Line 105: Line 105:
 An LED display showing the expected steps of the entry procedure can be connected as an option. The texts for the individual steps can be easily customized using the configurator. An LED display showing the expected steps of the entry procedure can be connected as an option. The texts for the individual steps can be easily customized using the configurator.
  
-{{sg3:led_display.png?nolink400|}}+{{:en:sg3:led_display.png?nolink400|}}
  
 ===== Graphical user interface ===== ===== Graphical user interface =====
Line 111: Line 111:
 A graphical user interface can be installed next to the entry point equipped with SGate, which guides the user through the entry procedure graphically and with short instructions. A graphical user interface can be installed next to the entry point equipped with SGate, which guides the user through the entry procedure graphically and with short instructions.
  
-{{sg3:gui.png?nolink&600|}}+{{:en:sg3:gui.png?nolink&600|}}
  
 ===== Operator user interface  ===== ===== Operator user interface  =====
Line 117: Line 117:
 To manage SGate, a pc application is available that allows status review and management. To manage SGate, a pc application is available that allows status review and management.
  
-{{sg3:oui.png?nolink&600|}}+{{:en:sg3:oui.png?nolink&600|}}
  
 ===== Configurator ===== ===== Configurator =====
Line 123: Line 123:
 The configurator is used to configure and later adjust the operation of the S Gate. The configurator is used to configure and later adjust the operation of the S Gate.
  
-[[sg3:configurator|]]+[[en:sg3:configurator|]]
  
-{{sg3::configurator.png?nolink&600|}}+{{:en:sg3::configurator.png?nolink&600|}}
en/sg3.1606474588.txt.gz · Last modified: 2020/11/27 10:56 by goran.kocjancic