Differences

This shows you the differences between two versions of the page.

--- temperature_and_humidity_sensor [2021/12/17 09:20] – alen.mejak
+++ temperature_and_humidity_sensor [2021/12/17 10:52] (current) – [Wiring] alen.mejak
@@ Line 24: / Line 24: @@
   * Climate and HVAC signal collection
   * Integrated use of temperature and humidity and chemical industries etc.
+===== Features =====
+  * High measurement accuracy
+  * Built-in high-performance microprocessor
+  * Multiple probes available
+  * Integrated use of temperature and humidity
+  * Superior performance and long-term stability
+===== Technical specifications =====
+| Power supply:            | 10-30VDC  Note: 0-10VDC output (limited to 24VDC Power Supply)      |
+| Signal output:                 | 4-20mA/0-5VDC/0-10VDC RS485 output (Modbus protocol)  |
+| Digital output:                 | Device address 1-255, default 1  |
+|                 | Device baud rate 2400, 4800, 9600 optional, default 4800                        |
+|                  | Byte format 8-bit data bit, 1 stop bit, no parity                                    |
+| Measuring temperature             | -40°C to +80°C                                        |
+| Measuring humidity :             | Relative humidity 0%-100% RH|
+| Temperature accuracy  :             | 0.5°C (25°C)|
+| Humidity accuracy  :             | 3% RH (5%RH-95%RH, 25°C) |
+| Long-term stability  :             | Temperature < 0.1°C/year, Humidity <0.1%RH/year |
+| Response time  :             | Temperature <18sec (1m/s wind speed), Humidity < 6sec (1m/s wind speed) |
+===== Wiring =====
+{{ hiq_hardware:rb-100-th_wiring.png  }}
+<WRAP pagebreak></WRAP>