Page locked

This page is currently locked for editing by another user. You have to wait until this user finishes editing or the lock expires.

Currently locked by: 10.0.0.202,3.21.28.69
Lock expires at: 2025/04/15 00:26 (8 min)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Firmware update ======

<WRAP pagebreak></WRAP>

===== CyBroBinLoader software =====
  * Download latest CyBroBinLoader.exe from www.cybrotech.com
  * Run CybroBinLoader.exe
  * In case Windows OS is blocking execution, click on more info and run anyway 

{{ hiq_energy:hems_v1_2_0:cybrobinloader.png?nolink&0x140        }}

<WRAP clear></WRAP>

<WRAP pagebreak></WRAP>

===== Firmware upload =====

  * Download latest HEMS firmware from:  en:hems_v1_2_0:download

</WRAP>

<WRAP clear></WRAP>

===== Installation and mounting =====
  * :!: Carefully open WM-1 module and configure serial communication with jumpers. (Default configuration is 9600bps, 8N1 with normal timeout)
  * :!: Place WM-1 module at least 10cm from other objects. Installation is not recommended inside metal cabinets.
  * Connect RS485 terminals to WM-1 RS485 terminals
    * A - A
    * B - B
    * C - GND
  * Connect to 230V power supply
  * Configure radio pairing

{{ hiq_hardware:wm1_module_diagram.png?nolink&0x500  }}
{{ hiq_hardware:wm1_mounting.png?nolink&0x500  }}