✎ en:hems_v1_2_0:methods_resources:firmwareupdate []

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

====== Firmware update ======

===== CyBroBinLoader software =====
  * Download latest CyBroBinLoader.exe from www.cybrotech.com
  * Run CybroBinLoader.exe
  * In case Windows OS is blocking execution, click on more info and run anyway

{{ hiq_energy:hems_v1_2_0:cybrobinloader.png?nolink&0x140        }}

===== Firmware upload =====

* Download latest HEMS firmware from:  en:hems_v1_2_0:download
  * Select correct Cybro NAD (sticker on top of MC controller)
  * Select firmware under PLC program
  * Enable PLC program and Start PLC
  * Click send
  * :!: Do not interrupt durring update process
 
{{ hiq_energy:hems_v1_2_0:cybrobinloader_selectnad.png?nolink }}

===== Installation and mounting =====
  * :!: Carefully open WM-1 module and configure serial communication with jumpers. (Default configuration is 9600bps, 8N1 with normal timeout)
  * :!: Place WM-1 module at least 10cm from other objects. Installation is not recommended inside metal cabinets.
  * Connect RS485 terminals to WM-1 RS485 terminals
    * A - A
    * B - B
    * C - GND
  * Connect to 230V power supply
  * Configure radio pairing

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Share Alike 4.0 International