✎ en:hiq_home:applications:commander []

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

====== HIQ commander ======

**HIQ Commander** is a smartphone application (iOS / Android). It allows the user to control lights, blinds, heating/cooling and alarm.

When started for the first time, the application automatically detects connected devices. The following devices are supported:
  * light (on/off)
  * dimmer (0..100%)
  * RGB dimmer (0..100%, hue, saturation)
  * blinds (up/down, move to position)
  * scene (apply, inverse, memorize)
  * thermostat (setpoint, temperature, humidity, fan speed)
  * temperature (room, outdoor, water, wall)
  * energy (energy/power consumption)
  * alarm (4 zones)
For each device, the user can give a recognizable name and select an appropriate icon.

You can also control various devices, such as bathroom fans, table fans, electric heaters or audio/video systems. RGB dimmer includes a white temperature mode, which allows user to select between cold daylight and warm evening light. Thermostat allows for a separate temperature for each room.

HIQ Commander can work using a local network or through internet access, using [[en:hiq_home:universe|HIQ Universe]].
{{gallery>hiq_building_automation:hiq_home:sw:commander:screen_shoot}}

===== Configuration =====

<WRAP column 320px>
|{{ hiq_building_automation:hiq_home:sw:commander:screenshot01.jpg?300&direct |}}|
</WRAP>

<WRAP column 320px>
**Download and install HIQ Commander**

On smartphone (Android or iOS) go to Play Store or App Store.
Find and install HIQ Configurator app.\\
\\

[[https://play.google.com/store/apps/details?id=com.cybroiqcommander|{{hiq_building_automation:hiq_home:sw:google_play.png?nolink|}}]]\\
[[https://itunes.apple.com/si/app/hiq-commander/id1073060359?mt=8/|{{hiq_building_automation:hiq_home:sw:apple_app_store.png?nolink|}}]]
</WRAP>

<WRAP column 320px>
|{{ hiq_building_automation:hiq_home:sw:commander:screenshot02.jpg?300&direct |}}|
</WRAP>

<WRAP column 320px>
**Accept all permissions**
</WRAP>

<WRAP column 320px>
|{{ hiq_building_automation:hiq_home:sw:commander:screenshot04.jpg?300&direct |}}|
</WRAP>

<WRAP column 320px>
**Run HIQ Commander and Autodetect HIQ System**

HIQ system must be already configured/[[en:hiq_home:methods:commissioning|commisioned]].\\
HC and your smartphone must be in the same local LAN/WiFi network.\\
Other data connections (i.e. Mobile data) must be disabled.
</WRAP>

<WRAP column 320px>
|{{ hiq_building_automation:hiq_home:sw:commander:screenshot05.jpg?300&direct |}}|
</WRAP>

<WRAP column 320px>
**Accept detected system**

**Set location:** used to calculate sunrise and sunset directly in HIQ Controller.

**Set time and date:** synchronize HIQ Controller time and date with smartphone.

**Enable internet access:** HIQ controller can be controlled from everywhere through HIQ Universe.\\
\\
\\
Use  "Disable" if any of the services is not available on your device, otherwise Autodetect will not be possible.

</WRAP>

<WRAP column 320px>
|{{ hiq_building_automation:hiq_home:sw:commander:screenshot06.jpg?300&direct |}}|
</WRAP>

<WRAP column 320px>
**Error notification if location is not available within your phone/application.**

In a case of an error notification disable that function.
</WRAP>

<WRAP column 320px>
|{{ hiq_building_automation:hiq_home:sw:commander:screenshot06a.jpg?300&direct |}}|
</WRAP>

<WRAP column 320px>
**HIQ Commander basic screen with all available objects**
</WRAP>

<WRAP column 320px>
|{{ hiq_building_automation:hiq_home:sw:commander:screenshot09.jpg?300&direct |}}|
</WRAP>

<WRAP column 320px>
**Use long press to open available options**

“Remove” object if device is currently not installed. You can “Undelete” it later.
</WRAP>

<WRAP column 320px>
|{{ hiq_building_automation:hiq_home:sw:commander:screenshot09a.jpg?300&direct |}}|
</WRAP>

<WRAP column 320px>
**Rename object **

Use recognizable names, depending on device type and location.
</WRAP>
<WRAP clear></WRAP>

<WRAP column 320px>
|{{ hiq_building_automation:hiq_home:sw:commander:screenshot10.jpg?300&direct |}}|
</WRAP>

<WRAP column 320px>
**Change icon **

Select icon, depending on the connected device.
</WRAP>

<WRAP column 320px>
|{{ hiq_building_automation:hiq_home:sw:commander:screenshot12.jpg?300&direct |}}|
</WRAP>

<WRAP column 320px>
**Object Information **

Type, name, description, used variables and controllers used by an object. Used for easier identification.
</WRAP>

<WRAP column 320px>
|{{ hiq_building_automation:hiq_home:sw:commander:screenshot13.jpg?300&direct |}}|
</WRAP>

<WRAP column 320px>
**Properties **

RGB dimmer, Thermostat, Scene and Alarm objects also offer properties.
</WRAP>

<WRAP clear></WRAP>
<WRAP column 320px>
|{{ hiq_building_automation:hiq_home:sw:commander:screenshot15.jpg?300&direct |}}|
</WRAP>

<WRAP column 320px>
** Properties - RGB dimmer**

Select “RGB” or “White temperature” mode.
Enable/disable “Color cycling” or “Evo lights”.
 </WRAP>

<WRAP column 320px>
|{{ hiq_building_automation:hiq_home:sw:commander:screenshot21.jpg?300&direct |}}|
</WRAP>

<WRAP column 320px>
** Properties - Thermostat **

“Setpoint”  and “Fan speed” selection.
</WRAP>

<WRAP clear></WRAP>
<WRAP column 320px>
|{{ hiq_building_automation:hiq_home:sw:commander:screenshot17.jpg?300&direct |}}|
</WRAP>

<WRAP column 320px>
**Properties - Scene **

Select scene 0 – 31 to be controlled with that object.
 </WRAP>

<WRAP column 320px>
|{{ hiq_building_automation:hiq_home:sw:commander:screenshot19.jpg?300&direct |}}|
</WRAP>

<WRAP column 320px>
** Properties - Alarm **

Select which zones will be included in alarm.\\
Zones are configured in HIQ Configurator.
</WRAP>

<WRAP column 320px>
|{{ hiq_building_automation:hiq_home:sw:commander:screenshot14.jpg?300&direct |}}|
</WRAP>

<WRAP column 320px>
**RGB Dimmer - Color picker**

Select color or white temperature and brightness with Color picker.
</WRAP>

<WRAP column 320px>
|{{ hiq_building_automation:hiq_home:sw:commander:screenshot23.jpg?300&direct |}}|
</WRAP>

<WRAP column 320px>
**Finished configuration **
</WRAP>

<WRAP column 320px>
|{{ hiq_building_automation:hiq_home:sw:commander:screenshot29.jpg?300&direct |}}|
</WRAP>

<WRAP column 320px>
**Menu **

{{hiq_building_automation:hiq_home:sw:commander:settings.png?40 }}\\

Make new **“Autodetect”** (new-another system or hardware change).

**“Rearrange”**  your objects.

**“Undelete”**  removed objects.

**“Automation”** settings.

**”Share”** your Configuration.

Additional **“Settings”**.

**“About”**.
</WRAP>

<WRAP column 320px>
|{{ hiq_building_automation:hiq_home:sw:commander:screenshot33.jpg?300&direct |}}|
</WRAP>

<WRAP column 320px>
**Rearrange **

Rearrange (long press and drag) your objects to optimally suit your needs.
</WRAP>

<WRAP column 320px>
|{{ hiq_building_automation:hiq_home:sw:commander:screenshot31.jpg?300&direct |}}|
</WRAP>

<WRAP column 320px>
**Undelete **

Mark removed objects and undelete them.
 </WRAP>

<WRAP column 320px>
|{{ hiq_building_automation:hiq_home:sw:commander:screenshot35.jpg?300&direct |}}|
</WRAP>

<WRAP column 320px>
**Automations **

Enable-disable and set [[en:hiq_home:introduction:features#automations|automations]].

In first line select desired HC (NAD number).
\\
\\
\\
\\
{{hiq_building_automation:hiq_home:sw:commander:on-off.jpg?45}}

Can be enabled/disabled on separate smartphones.\\
Valid for 1 smartphone and all HC.
\\
\\
\\
\\
{{hiq_building_automation:hiq_home:sw:commander:enable-disable.jpg?30}}

Can be enabled/disabled on separate HC.\\
Valid for all smartphones and 1 HC.
</WRAP>

<WRAP column 320px>
|{{ hiq_building_automation:hiq_home:sw:commander:screenshot37.jpg?300&direct |}}|
</WRAP>

<WRAP column 320px>
**Share **

Share your favourite configuration with other users or devices.

{{hiq_building_automation:hiq_home:sw:commander:share.jpg?40&nolink}}

Press share button and select your sharing path.\\
Accept in another device and open with HIQ Commander.
</WRAP>

<WRAP column 320px>
|{{ hiq_building_automation:hiq_home:sw:commander:screenshot39.jpg?300&direct |}}|
</WRAP>

<WRAP column 320px>
**Settings **

**Communication:**\\
     -Auto – automatic switching between local network and internet (recommended).\\
     -LAN – (Local Area Network) will work only in local network.\\
     -WAN – (Wide Area Network) will always work through internet.\\
**Internet access:**  Can be enabled (blue dot shows that it is enabled). Can be disabled in HIQ Configurator.\\

**Left-handed icons:** Object icons on the left side.\\

**Show inputs:** Show input state (blue dot – button is pressed or signal is present).\\

**Synchronize RTC clock:** Clock on the HC will be synchronised with smartphone clock.\\

**Object height:** Adapt object height to your phone resolution and your preferences.

</WRAP>

<WRAP column 320px>
|{{ hiq_building_automation:hiq_home:sw:commander:screenshot42.jpg?300&direct |}}|
</WRAP>

<WRAP column 320px>
**About **
</WRAP>

===== Use HIQ commander with custom application =====

Following [[en:hiq_home:applications:commander:custom|article]] describes how to use HIQ Commander with custom CyBro application.

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Share Alike 4.0 International