Page locked

This page is currently locked for editing by another user. You have to wait until this user finishes editing or the lock expires.

Currently locked by:
Lock expires at: 2025/03/14 20:14 (15 min)

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

====== Micro card reader ======

**Wiegand RFID receiver**

</WRAP>

|< 100% 40% 20% >|
| Model number: ^ CR-MR | EM, 125 kHz                                            |
| :::           ^ CR-MM | Mifare                                                 |
| Mounting:     | Field, fi 20 mm                                               ||
| Dimensions:   | fi 26 x 25 mm                                                 ||
| Connection:   | Wiegand to [[en:hiq_hw:cr-w2-iq|Card reader interface]]       ||

</WRAP>

\\

===== Technical specifications =====

===== Wiring =====

|<500px  100px 100px 100px 100px 100px>|
^  CR-MR    ^  CR-W2-IQ      |^  MC-230-3W     |^  Notes           |
^  :::      ^  1st  ^  2nd    ^  1st  ^  2nd    | :::              |
|  RD       |  +12V          ||  +12V          || Power supply     |
|  BK       |  GND           ||  GND           || :::              |
|  GN       |  D0-0+1        ||  D0            || Wiegand data     |
|  WH       |  D1-0  |  D1-1  |  D1-0  |  D1-1  | :::              |
|  YE       |  GN-0  |  GN-1  |  GN-0  |  GN-1  | LED indicator    |
|  BN       |  - / GND*      ||  - / GND*      || Wiegand 26 / 34  |

* Not connected => Wiegand 26, GND => Wiegand 34

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Share Alike 4.0 International