Page locked

This page is currently locked for editing by another user. You have to wait until this user finishes editing or the lock expires.

Currently locked by: 10.0.0.202,18.190.207.221
Lock expires at: 2025/05/18 15:54 (14 min)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Master Controller ======

**Advanced Controller**

<WRAP column 350px>

{{ :en:hiq_hw:mc-230-w3.png?nolink |}}

</WRAP>

<WRAP column 600px>

| Model number: ^ MC-230-3W  | 230 VAC, 14 IO, RS232/RS485, 2 Wiegand                                      |
| Mounting:     | DIN rail(35mm), 6M, 106mm                                                               ||
| Dimensions:   | 106x108x58mm                                                                      ||


</WRAP>

<WRAP clear></WRAP>

===== Features =====

  * 8 digital inputs
  * 4 relay outputs 8A
  * 4 NPN outputs 1A
  * 2 Wiegand interface
  * Ethernet, USB, IEX-2, 1×RS232, 1×RS232/RS485,
  * 230V AC power supply   

===== Safety standards =====

EN 61010-1, EN 61010-2-201, EN 61131-2

<WRAP pagebreak></WRAP>

===== Technical specification =====

|< 40% 42% >|
| Relay outputs:               |                                       8A/250V resistive|
| Communication:               | Ethernet, 1x RS232, 1x RS232/RS485, IEX-2 bus, 2x Wiegand |
| Nominal power rating:        |                                                230 VAC |
| Power consumption:           |                              typ. 1W (no load), 10W max|
| Power output:                |                           24V 200mA (IEX-2 + terminals)|
| Ingress protection:          |                                                   IP20 |
| Operating temperature:       |                                                0..45°C |
| Storage temperature:         |                                              -20..75°C |
| Relative humidity:           |                                             0..95% n/c |
| Wiegand data input           |                    active low, internal pull-up 5V 1mA |
| Wiegand data timing          |                               20us pulse, 20ms timeout |
| Wiegand power output         |                                   12V 500mA for reader |
| Wiegand LED output           |                        100mA NPN open collector 12/24V |


===== Terminals =====


{{:en:hiq_hw:pasted:mc-230-3wterminals.png}}