✎ en:hiq_hw:pm3-i-d []

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

====== Three phase power-sensor ======

**Three phase power-sensor**

</WRAP>

^ Used for measuring power and energy of                ||
| ✔ | three-phase energy sources                        |
| ✔ | three-phase energy consumers                      |

</WRAP>

===== Applications =====

* Digital multi-function power-sensor for 3-phase sources or consumers

===== Features =====

* Three phase direct connection up to 65 A
  * Serial RS485 communication
  * Display LCD 7+1 digit
  * Multi-functional front LED

===== General description =====

The PM-3-IQ is intended for energy measurements in three-phase electrical power network and can be used in residential, industrial and utility applications. Power-sensor measures energy directly in 4-wire networks according to the principle of fast sampling of voltage and current signals.

Connecting terminals can be sealed up against non-authorized access with protection covers. They are built to be fastened according to EN 60715 standard. Power-sensor has built-in  RS485 serial communication with the MODBUS protocol which enables data transmission and thus connection of the measuring places into the network for the control and management with energy.

===== Technical specifications =====

|< 35% 40% >|
| Nominal voltage               |  3x230/400 VAC (-20..+15%) |
| Power connector               |   1,5 .. 16 mm<sup>2</sup> |        
| Reference current             |                        5 A |
| Maximum current               |                       65 A |
| Operational frequency range   |                 50 or 60 Hz|
| Internal power consumption    |                     < 8 VA |
| Communication type            |         RS485(half-duplex) |
| Communication protocol        |                 Modbus RTU |
^ Accuracy                                                  ||
| Active energy (Wh)            |       Class 1 IEC 62053-21 |
| :::                           |         class B EN 50470-3 |
| :::                           |     ±1.5% from Imin to Itr |
| :::                           |       ±1% from Itr to Imax |
^ Ambient conditions and Safety                             ||
| Dust/water protection         |                       IP50 |
| Operating temp. range         |               -25 ... 55°C |
| Indoor sensor                 |                        yes |
| Protection class              |                         II |
^ EC Directives conformity                                  ||   
|          EC Directive on Measuring Instruments 2014/32/EU ||
|                            EC Directive on EMC 2014/30/EU ||
|                    EC Directive on Low Voltage 2014/35/EU ||
|                              EC Directive WEEE 2002/96/EC ||

===== Connection =====

===== Manual =====

{{ hiq_energy:goflex_hems:hardware:wm3-6-tehnicna-dokumentacija-ver-1.04.pdf | PM3-I-D Technical Documentation}}

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Share Alike 4.0 International