Page locked

This page is currently locked for editing by another user. You have to wait until this user finishes editing or the lock expires.
Currently locked by: 10.0.0.202,18.118.0.158
Lock expires at: 2025/04/18 17:40 (12 min)
This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== RDX Charger (Robotina Dynamic Charger) ======


<WRAP column 400px>

{{hiq_hardware:rdx_charger_wiki.png}}  

</WRAP>

<WRAP column 550px>

|< 100% 80% 20% >|
| Description ^ Order Code                                              |
| RDX Charger with type 2 cable and RFID card reader  ^ RDX-RF                                            |
| RDX Charger with type 2 cable, RFID reader and RCD AC ^ RDX-RF-R                                              |
| RDX Charger with type 2 cable, RFID reader and IOT Linker^RDX-RF-I                                             |
| RDX Charger with type 2 cable, RFID reader, RCD AC and IOT linker^RDX-RF-RI                                  |
| RDX Charger with type 2 cable and QR code reader  ^ RDX-QR                                            |
| RDX Charger with type 2 cable, QR code reader and RCD AC ^ RDX-QR-R                                              |
| RDX Charger with type 2 cable, QR code reader and IOT Linker^RDX-QR-I                                             |
| RDX Charger with type 2 cable, QR code reader, RCD AC and IOT linker^RDX-QR-RI                                  |
                                   


</WRAP>

<WRAP clear></WRAP>

===== Features =====

  * **Up to 22kW of charging power**
  * **Modern design with IP54 & IK10 standard**
  * **Suitable for indoor and outdoor use**
  * **Coloured LED light indicates charging status**
  * **Easy operability with one button on housing**
  * **Monitor & control on application**
  * **Compatible with 3rd party software**
  * **Secure charger with remote locking option**
  * **Save by charging (economy charging) during off-peak hours**
  * **Charge with surplus energy**
  * **Priority charging at the highest possible power**
  * **Dynamic load balancing keeps consumption power below max allowed (protect grid fuse/s)**
  * **Manage charging of electric vehicles (EV fleet)**
  * **Remote control of key consumers (heat pump, battery storage system...)**
  * **6mA DC residual current, overvoltage and undervoltage protection**
  * **30mA AC residual current **
  * **RFID or QR access control**
  * **Long range wireless power meters for installation without cabling**
  * **Fully compliant with IEC 61851**





<WRAP pagebreak></WRAP>



 ===== Technical specifications =====

| Nominal voltage 	    |     1x230Vac 50/60Hz, 3x230/400Vac 50/60Hz|
| Maximum current           |           1x32A, 3x32A|
| Maximum charging power    |                   22kW|
| Connector        	    |        Type2, 5m cable|
| Network connection        |     Ethernet 100M RJ45|
|:::                        |       4G LTE (option) |
| Ingress protection        |                   IP54|
| Impact resistance 	    |                   IK10|
| Operating temperature	    |         -20°C to +60°C|
| Storage temperature       |        -40°C to + 70°C|
| RCD (residual-current device)  |         DC,  6mA |   
|:::                        |     AC, 30mA (option) |
| Standards                 |              IEC 61851|   
 
===== Dimensions =====

{{hiq_hardware:rdx_charger_dimensions.png}} 


===== Cable holder mounting options =====

{{hiq_energy:rdx_charger:montaza_6.png}}\\

===== Accessories =====


| **Description** 	    |     **Order Code**|
| Wireless external single-phase Power sensor kit|            **WPM1-E-D**|
| Wireless external three-phase Power sensor kit |             **WPM3-E-D**|
| External single-phase Power sensor|            **PM1-E-D**|
| External three-phase Power sensor|             **PM3-E-D**|
| Wireless Modbus bridge |  **WM-1**|
| Wireless relay, to control other loads in the building |  **WR-1**|
| Protective roof      |  **RDX-PR**|
| Freestanding set   |            **RDX-FS**|
| 4G LTE modem for IOT linker **This option is only possible for RDX Charger models that already have an integrated IOT linker**|            **IOT-L2-W**|