✎ en:lighting-iq:use_cases:outdoor []

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

====== Outdoor lighting ======

Basic characteristics:
  * many lights and push-buttons, usually in several places
  * time-consuming adjustment of lighting to actual needs

==== HIQ Lighting advantages ====

* Scenes triggered by keys:
     * Smaller number of keys
     * Easier, faster adjustment of lighting to actual needs
     * Easy adaptation to lifestyle change
   * Scenes can also be triggered automatically (schedule, at night)
   * Lights can be included in other scenes (turn off everything when leaving home)

==== Wiring ====

|< 450px 150px >|
^  M00 - IX00    | Main entrance motion sensor          |
^  M01 - IX01    | Yard motion sensor                   |
^  M02 - IX02    | Side entrance motion sensor          |
^  B00.0 - IX03  | Terrace lights push-button           |
^  B00.1 - IX04  | Patio lights push-button             |
^  B00.2 - IX05  | Pool lights push-button              |
^  L00 - QX00    | Lights on path to the main entrance  |
^  L01 - QX01    | Main entrance light                  |
^  L02 - QX02    | Yard light                           |
^  L03 - QX03    | Lights on path to the patio          |
^  L04 - QX04    | Terrace lights                       |
^  L05 - QX05    | Patio lights                         |
^  L06 - QX06    | Pool lights                          |
^  L07 - QX07    | Garden lights                        |
^  L08 - QX08    | Garden light                         |
^  L09 - QX09    | Garden light                         |

{{:en:lighting-iq:use_cases:wiring_05.png?direct&1200|}}
==== Configuration ====

- Configure inputs:
    - Input 0 as ''low-light only time extend'' for Light 1
    - Input 1 as ''low-light only time extend'' for Light 2
    - Input 2 as ''low-light only time extend'' for Light 3
    - Input 3 as ''toggle'' for Light 4
    - Input 4 as ''toggle'' for Light 5
    - Input 5 as ''toggle'' for Light 6
  - Configure timeouts:
    - 30 s for Light 1
    - 300 s for Light 2
  - Configure scenes:
    - All off: scene 0 as all off
    - Evening on: scene 1 as on for Lights 7, 8 and 9
    - Evening off: scene 2 as off for Lights 7, 8 and 9
    - Full: scene 3 as all on
  - Set schedules:
    - Evening: set scene 1 at sunset scene 2 at midnight

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Share Alike 4.0 International