✎ en:ms_main:ir-a6-lc []

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

====== Motion sensor ======

**Passive infrared detector on wall or ceiling**

</WRAP>

\\
===== Applications =====
  * Motion detector 
  * Ready light 
  * Intrusion detector
  * Lighting control
  * Hotel GRMS

</WRAP>

<WRAP clear></WRAP>
\\
===== Features =====
  * Aestetical look
  * Easy mount

\\
===== Installation instruction =====

* Do not install the detector at position which faces direct or reflected sunlight or near windows with direct car headlight.

* Ensure that there are no obstructions (plants, screens, furniture etc.) in the field of view that may cause incorrect cover/operation of the detector.

* Avoid locating the detector in areas that contain equipment that may change the environment temperature rapidly (i.e. above radiator or under the air-conditioner)

* Install the detector at proper height on a rigid surface. Do not install the detector on vibrating surface.

* PIR detector is more sensitive to the motions “across” the detection zones than “toward” or “away”.

\\
===== Detection pattern =====

===== Range and mount height =====

\\

===== Dimensions and mounting =====

1. Separate the bottom-stand from the sensor body by turning it clockwise against the sensor body.

2. Pull the wires through the hole in the middle of the bottom-stand.

3. Fix the bottom-stand on the selected location with two screws as shown on the drawing.

4. Connect the wires.

5. Fix the sensor body on the bottom-stand and turn anti-clockwise.

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Share Alike 4.0 International