✎ partners:firmware []

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

==== HIQ-HC FW upgrade ====

| Download and save CyPro IDE                                                                ||  {{:partners:cypro_v2.7.5.exe|CyPro}}   |
| Run and install it                                                                         || :::                                                                                   |
| Download and open project                                                                  ||  {{:partners:hc-iq_v127.cyp|}}                                                        |
| Find Home Controller NAD (sticker on top of HC)                                            ||  {{sw:hc-nad.jpg?direct&200|}}                                                        |
| Select Home Controller                           | Hardware Setup [F5]... -> __A__utodetect |  {{sw:select_hc_nad.png?direct&200|}}                                                 |
| Send Program                                     | __P__rogram -> S__e__nd [F9]             |  {{sw:send_fw_to_hc.png?direct&200|}}                                                 |
| Start PLC program                                | __P__rogram -> S__t__art PLC [F11]       |  {{sw:run_hc.png?direct&200|}}                                                        |

==== HIQ-DC FW upgrade ====

| Download and unzip CybroIEXManager                          ||  [[http://www.cybrotech.co.uk/partners/Downloads/Software/CyBroIexManager%20v1.1.5.zip|CyBroIexManager]]    |
| Download and unzip Device Controller FWs                    ||  {{:partners:firmware.zip|}}                                                                                |
| Start CybroIEXManager.exe                                   ||  {{sw:cybroiexmanager_main.png?direct&200|}}                                                                |
| Scan for Home controller                      |    [Scan]    |  {{sw:cybroiexmanager_scan_hc.png?direct&200|}}                                                             |
| Select Home Controller                                      ||  {{hw:cybroiexmanager_scan_dc.png?direct&200|}}                                                             |
| Scan for connected IEX Device Controllers     |  [Scan IEX]  | :::                                                                                                         |
| For each connected device type open HIQ-DC FW |  [Open]      |  {{sw:cybroiexmanager_open_fw.png?direct&200|}}                                                             | 
| Send Firmware to HIQ-DC                       |  [Send]      |  {{sw:cybroiexmanager_send_fw.png?direct&200|}}                                                             |

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Share Alike 4.0 International