====== Manual HIQ device controllers address ======

Download, unzip and run CybroIEXManager {{hiq_building_automation:hiq_home:sw:cybroiexmanager.zip|CyBroIexManager}}.

Pres "Scan" button [1] to discover all controllers in LAN. Select HC-IQ serial number on discovered controllers list [2] and press "Scan IEX" button [3]. All HIQ-DC should appear in main list-box [4].

{{hiq_building_automation:hiq_home:sw:configurator:manual_address:iex_manager_1.png?direct&300|}}
{{hiq_building_automation:hiq_home:sw:configurator:manual_address:iex_manager_2.png?direct&300|}}

In "New NAD" column [5] enter NAD addresses as per following table:

|<30% 20% 20% 20% >|
^  HIQ-DC   ^  order  ^  address  |
^ LC-10-IQ  |   1st   |    100    |
^ :::       |   2nd   |    101    |
^ :::       |   3rd   |    102    |
^ :::       |   4th   |    103    |
|                               ||| 
^ LD-X4-IQ* |   1st   |    120    |
^ :::       |   2nd   |    121    |
^ :::       |   3rd   |    122    |
^ :::       |   4th   |    123    |
|                               ||| 
^ BC-5-IQ   |   1st   |    200    |
^ :::       |   2nd   |    201    |
|                               ||| 
^ SC-4X-IQ  |   1st   |    300    |
^ :::       |   2nd   |    301    |
^ :::       |   3rd   |    302    |
^ :::       |   4th   |    303    |
|                               ||| 
^ TH-X-IQ   |   1st   |    400    |
^ :::       |   2nd   |    401    |
^ :::       |   3rd   |    402    |
^ :::       |   4th   |    403    |
^ :::       |   5th   |    404    |
|                               ||| 
^ FC-1-IQ   |   1st   |    420    |
^ :::       |   2nd   |    421    |
^ :::       |   3rd   |    422    |
^ :::       |   4th   |    423    |
^ :::       |   5th   |    424    |

* LD-D8-IQ is detected as two separate modules.

And press "Send" button [6].

**Note: If we press "Autoaddress" then the manual address will be corrupted and must be repeated.**