====== Card reader interface ===== 

**Wiegand card reader interface for Access Control systems**

<WRAP column 350px>

{{ :en:hiq_hw:pasted:cr-w2-iq.png?nolink |}}

</WRAP>

<WRAP column 350px>

|< 100% 40% 60% >|
| Model number: ^ CR-W2-IQ                                        |
| Mounting:     | DIN rail, 3M                                    |
| Dimensions:   | 53 x 117 x 58 mm                                |
| Connection:   | IEX-2 bus                                       |


</WRAP>

<WRAP clear></WRAP>

  * card reader for 2 Wiegand RFID receivers 
  * 2 × relay output
  * 4 × switch/potentiometer input


<WRAP pagebreak></WRAP>



\\ 

===== Technical specifications =====

| Power supply:            | 24 VDC (18..26 VDC), 120 mA                     |
| Digital inputs:          | internal pull-up 12V, 2mA                       |
| Analog inputs:           | 0-10 V or potentiometer 10 kohm                 |
| Relay outputs:           | 5 A / 250 V                                     |
| Size and weight:         | 53 x 117 x 58 mm, 160g                          |
| Mounting:                | DIN rail                                        |
| Protection:              | IP20                                            |
| Communication:           | Wiegand protocol                                |
| Operating conditions:    | 0..45 °C, 0..95 % RH non-condensing             |
| Storage temperature:     | -20..75 °C                                      |
| Standards:               | EN 61000-6-2, EN 61000-6-3                      |