====== Wireless relay ====== **Single-phase power relay and consumer measurement** {{ hiq_energy:goflex_hems:hardware:rl1.png?nolink |}} | Model number: ^ RL1-WN-W | | Mounting: | On wall | | Dimensions: | 76 × 116 × 25 mm | ^ Used for single phase managed consumer || | ✔ | toggling power supply | | ✔ | measuring power and energy | ===== Applications ===== * Wireless power-relay with consumer measurements ===== Features ===== * Wireless load management * Consumer measurements ===== General description ===== Wireless relay RL1-WN-W is a wall mounted control unit. It can switch on/off an electric load, measure active power and energy consumption. This device has to be directly and continuously main powered. For network purposes, it is a Router (Repeater) i.e. it has function of maintaining radio traffic from and to other similar devices and it can also act as a parent device for battery-powered sensors of the same family. ===== Technical specifications ===== |< 35% 40% >| | POWER SUPPLY | 85-250 Vac; 50/60 Hz | | WIRELESS CHARACTERISTICS | 2405 MHz ÷ 2480 MHz | | ::: | DSSS Modulation | | ::: | Nominal transmission Power +3dBm | | ::: | IEEE 802.15.4 compliant | | ::: | Stack EmberZNet3.5.x | | ::: | Stack version 0 | | ::: | Proprietary profile ID | | ::: | Proprietary encryption key | | MEASURES | Energy consumed [Wh] | | ::: | Active Power [W] | | ::: | Time of measurement [sec] | | RELAY CHARACTERISTICS | Contacts 10A 250V (resistive load) | | CONNECTIONS | Terminal blocks | | OPERATING CONDITIONS | -10 + 55 °C | | PROTECTION CLASS | IP30 | ===== Terminals ===== |< 100% 25% 4% 4% 33% >| ^ RL1-WN-W ||^ Power source ^ Consumer | | PE | PE | 1 | PE | / | | ::: | PE | 1a | / | PE | | Neutral | N | 2 | N | / | | ::: | N | 2a | / | N | | Phase IN | L | 3 | L | / | | Phase OUT | L | 3a | / | L | | Not used | L | 3b | / | / | {{ hiq_energy:goflex_hems:hardware:rl1_terminals.png?nolink |}} ===== Connection ===== {{ hiq_energy:goflex_hems:hardware:rl1_wiring.png?nolink&500 |}}