====== Electronic thermostat ======

**electronic thermostat**

<WRAP column 350px>

{{  hiq_hardware:th-1m-iq.png?nolink  }}
 
</WRAP>

<WRAP column 300px>

| Model number: ^ TH-1M-IQ                     |
| Mounting:     | on-wall, 3M rectangular box |
| Dimensions:   | 122×80×23mm                 |

===== Applications =====

  * room / heating zone thermostat

</WRAP>

<WRAP clear></WRAP>

===== Features =====

  * alternate setpoint
  * fan options:
    * manual fan speed
    * fan speed limits
    * fan-max with time limitation
  * night mode
  * various sensor options:
    * internal
    * external
    * remote


===== General description =====

TH-1-IQ module belongs to room/zone thermostat controllers. It can be used for any heating and/or cooling system including: fan-coils, hot water or electrical radiators, ceiling fans, floor/ceiling heating/cooling, split AC. TH series provide maximum comfort and energy saving functionality. Set-points are selectable on the unit or through other devices.
Advanced functionality including smart-phone operation, internet operation, scheduling, HIQ automations, automatic weather response and more are provided when connected to HIQ Home Controller and HIQ universe.

<WRAP pagebreak></WRAP>

===== Technical specification =====

| Window switch input:     |     internal pull-up 12V, 2mA |
| Temperature measurement: |  internal or external ES/ES-A |
| Power supply:            |                      24V/15mA |
| Ingress protection:      |                          IP20 |
| Operating temperature:   |                       0..45°C |
| Storage temperature:     |                     -20..75°C |
| Relative humidity:       |                    0..95% n/c |

===== Terminals =====


<WRAP column 55%>

| IEX2 BUS                               ^    +24V   | IEX2 bus                      |
| :::                                    ^    CANH   | :::                           |
| :::                                    ^    CANL   | :::                           |
| :::                                    ^    GND    | :::                           |
| Window magnetic switch                 ^    IX0    | Digital input                 |
| :::                                    ^    GND    | :::                           |
| External temperature sensor ES / ES-A  ^    TS1    | Temperature sensor input      |
| :::                                    ^    GND    | :::                           |


</WRAP>

<WRAP column 40%>


{{  hiq_hardware:th-1m-iq-ter.png?nolink&400  }}

</WRAP>

<WRAP clear></WRAP>
When installing: "Autoaddress" button will link [[en:hiq_hw:fc-1-iq| FC-1-IQ]] unit with lowest serial number with thermostat with lowest serial number and so on.