====== Bathroom lighting ====== 

  * Relatively small space with a few lights
  * Normally, a motion sensor with auto-off timer is used, which has major drawbacks:
    * The light turns off if we are relatively still in the room
    * The light only turns on when we enter the room - it is uncomfortable to enter a dark room

{{:en:hiq_lighting:use_cases:case_04.png?nolink|}}

===== HIQ Lighting Advantages =====

  * By taking into account the condition of the door, it ensures reliable and comfortable operation in most cases:
    * The lights come on as soon as the door is opened
    * Avoid switching off the lights in actual presence (you cannot leave the room through a closed door)
    * Proper operation even when the door is open
    * Taking into account daylight without a physical sensor 

===== Wiring =====

|< 350px 150px >|
^  M00 - IX00  | Motion sensor                 |
^  B00 - IX01  | Push-button for mirror light  |
^  D00 - IX02  | Door opening sensor           |
^  L00 - QX00  | Ceiling lights                |
^  L01 - QX01  | Spot light                    |
^  L02 - QX02  | Mirror light                  |

{{:en:hiq_lighting:use_cases:wiring_04.png?direct&600|}}

==== Configuration ====

  - Clear all default inputs functionalities
  - Set Scene 00 (L00 -> ON, L01 & L02 -> OFF)
  - Set Input 00 (motion sensor) to time-extend for Scene 00
  - Set Input 02 (door open sensor) to inverse for Scene 00
  - Set Input 01 (push-button) to toggle for Light 02
  - Set Time-out for Scene 00 to 5 min (to be taken into account when the door is open)
  - Save settings to permanent memory

{{ :en:hiq_lighting:use_cases:ready-light.mp4?1282 |}}