====== 4 switch or potentiometer input ======


<WRAP column 350px>

{{:en:ms_main:sw-w3_look.png?400|}}
 
</WRAP>

<WRAP column 300px>

| Model number: ^ SW-W3-IQ                                      |
| Mounting:     | in-wall, in junction box behind scene buttons |
| Dimensions:   | 50×50×15mm                                    |

</WRAP>

<WRAP column 400px>

===== Applications =====

  * 4 Push buttons or Motion sensor inputs
  * Individual light / dimmer button
  * Blinds up/down button

</WRAP>

<WRAP clear></WRAP>

===== Features =====

  * configurable button action:
    * on/off
    * dimmer push button (on/off and 0..100%)
    * blinds up/down

===== General description =====

SW-W3-IQ is in wall compact remote input module. Any kind of push-button design can be used. 

<WRAP pagebreak></WRAP>

===== Technical specification =====

| LED outputs:           |         10 mA, PWM dimmable |
| Inputs:                |  internal pull-up 12V, 2 mA |
|                        |  0..10 V (10 bit, 0..1023) or potentiometer |
| Power supply:          |                    24V/35mA |
| Ingress protection:    |                        IP20 |
| Operating temperature: |                     0..45°C |
| Storage temperature:   |                   -20..75°C |
| Relative humidity:     |                  0..95% n/c |
| Standards:             |                  EN 60730-1 |

===== Terminals =====

{{:en:ms_main:sw-w3_wiring.png?400|}}