====== Motion sensor DALI with Lighting sensing ====== **Passive infrared DALI detector with light sensing** {{:en:ms_main:ir-a12dl-lc_look.png?400|}} | Model number: ^ IR-A12DL-LC| | Connects to: | DALI | | Mounting: | On ceiling or wall | | Dimensions: | 95x95x45 mm | \\ ===== Applications ===== * Motion detector * Ready light * Lighting control * GRMS \\ ===== Features ===== * Aestetical look * Easy mount * Powered by DALI bus * Lighting sensing * High sensitivity PIR sensor \\ ===== General description ===== A passive infrared detector on DALI system with lighting sensing.\\ \\ ===== Installation instruction ===== * Do not install the detector at position which faces direct or reflected sunlight or near windows with direct car headlight. * Ensure that there are no obstructions (plants, screens, furniture etc.) in the field of view that may cause incorrect cover/operation of the detector. * Avoid locating the detector in areas that contain equipment that may change the environment temperature rapidly (i.e. above radiator or under the air-conditioner) * Install the detector at proper height on a rigid surface. Do not install the detector on vibrating surface. * PIR detector is more sensitive to the motions “across” the detection zones than “toward” or “away”. \\ ===== Range ===== {{:en:ms_main:ir-a12dl-lc_range.png?700|}} ===== Technical specifications ===== | Current draw | 10 mA from DALI bus| | Temperature | -20°C ~ +60°C| | Operating humidity| 10%-80% RH Non-Condensing| | Connecting Wires | 0.5~1.5 mm², solid or stranded wire| | Weight | 78.5g| ===== Dimensions ===== {{:en:ms_main:ir-a12dl-lc_dim.png?550|}} ===== Terminals ===== | DALI ^ + | | DALI ^ - | ===== Installation ===== {{:en:ms_main:ir-a12dl-lc_wiring.png?700|}} ===== Settings ===== {{:en:ms_main:ir-a12dl-lc_settings_1.png?450|}} {{:en:ms_main:ir-a12dl-lc_settings_0.png?350|}} {{:en:ms_main:ir-a12dl-lc_settings_01.png?350|}}