====== RDX Charger======



<WRAP column 300px>

{{hiq_hardware:rdx_charger_wiki.png}}  

</WRAP>

<WRAP column 350px>

|< 100% 73% 27% >|
| Description ^ Order Code                                              |
| Robotina Dynamic Charger with type 2 cable and RFID card reader  ^ RDX-RF                                            |
| Robotina Dynamic Charger with type 2 cable, RFID card reader and residual current device ^ RDX-RF-R                                              |
| Robotina Dynamic Charger with type 2 cable, RFID card reader and IOT Linker^RDX-RF-I                                             |
| Robotina Dynamic Charger with type 2 cable, RFID card reader, residual current device and IOT linker^RDX-RF-RI                                  |
| Robotina Dynamic Charger with type 2 cable and QR code reader  ^ RDX-QR                                            |
| Robotina Dynamic Charger with type 2 cable, QR code reader and residual current device ^ RDX-QR-R                                              |
| Robotina Dynamic Charger with type 2 cable, QR code reader and IOT Linker^RDX-QR-I                                             |
| Robotina Dynamic Charger with type 2 cable, QR code reader, residual current device and IOT linker^RDX-QR-RI                                  |
                                   


</WRAP>

<WRAP clear></WRAP>

===== Features =====

  * **Up to 22kW of charging power**
  * **Modern design with IP54 & IK10 standard**
  * **Suitable for indoor and outdoor use**
  * **Coloured LED light indicates charging status**
  * **Easy operability with one button on housing for charging modes & stop **
  * **Monitor & control charger operation via web-based cloud interface**
  * **Compatible with 3rd party software**
  * **Secure charger with remote locking option**
  * **Save by charging (economy charging) during off-peak hours**
  * **Charge with surplus energy (solar & wind energy)**
  * **Priority charging at the highest possible power**
  * **Dynamic load balancing keeps consumption power below max allowed (protect grid fuse/s)**
  * **Manage charging of electric vehicles (EV fleet)**
  * **Remote control of key consumers (heat pump, battery storage system,)**
  * **6mA DC residual current, overvoltage and undervoltage protection**
  * **RFID or QR access control to allow authorized usage only**
  * **Long range wireless power sensors for installation without cabling**
  * **Fully compliant with IEC 61851**




<WRAP pagebreak></WRAP>



=====  Introduction ===== 

**PLUG IN & GO** \\
Simply connect vehicle to charge and unplug to drive.\\ 
//RDX Charger// makes charging as easy as possible by enabling of charging using button on housing or by application on cloud. 

**BUTTON & LED on housing** \\
  * charging starts automatically as soon as vehicle is connected with power cable
  * press button to stop charging, press again to restart
  * press and hold button to activate priority charging 
  * LED light indicates charging status
  * operating with button doesn't require active application \\
//*Button on housing and "button" on cloud application share same functionality. It doesn’t matter which one is used.//

 \\  
{{:hiq_energy:rdx_charger:robotina_charger_descr_01.png?direct&400|}}
 \\  

**RFID or QR** \\
  * authentication for users 
  * charging starts after authentication is successful
  * RFID or QR reader could be installed on housing, both is not possible.

**LOCKED ** \\
  * disable unauthorized use of charging station
  * locked is deactivated by authorized RFID card, key fob or by cloud application

**ECONOMY CHARGING**\\
  * allows charging with a current set by user
  * charging at low tariff only (depending on table set by user)
  * charging by surplus energy only or in combination with grid power

**PRIORITY CHARGING** \\
  * Utilize all available power to charge as fast as possible
  * In case of //Dynamic load balancing// temporary suspends high-power loads to increase available power for charging simultaneously keeping total power below max allowed power




^ LED indicator                                   ^ Steady light                     ^ Flashing light   ^
| {{ :hiq_energy:rdx_charger:white_ring.png }} | EV not connected | Paused by EVSE (short press to unpause)              |
| {{ :hiq_energy:rdx_charger:yellow_ring.png }} | EV connected, not charging | Paused by EVSE (short press to unpause)|
| {{ :hiq_energy:rdx_charger:blue_ring.png }} | EV connected, charging | /              |
| {{ :hiq_energy:rdx_charger:green_ring.png }} | EV connected, charging ended | / |
| {{ :hiq_energy:rdx_charger:red_ring.png }} | / | Error |
| {{ :hiq_energy:rdx_charger:magenta_ring.png }} | / | Locked|
| {{ :hiq_energy:rdx_charger:cian_blue_ring.png }} | / | Priority charging |
| {{ :hiq_energy:rdx_charger:cian_yellow_ring.png }} | / | Priority charging paused |
| {{ :hiq_energy:rdx_charger:cian_green_ring.png }} | / | Priority charging ended |


 ===== Technical specifications =====

| Nominal voltage 	    |     1x230Vac 50/60Hz, 3x230/400Vac 50/60Hz|
| Maximum current |             1x32A, 3x32A|
| Maximum charging power |             22kW|
| Connector        	  |  Type2, 5m cable|
| Network connection         |  Ethernet 100M RJ45|
| Ingress protection   |            IP54|
| Impact resistance 	    |         IK10|
| Operating temperature	      |           -20°C to +45°C|
| Storage temperature  |                       -40°C to + 70°C|
| Charging pilot negative  |                     1mA, 20ms reaction time|   
| Residual direct current  |                     6mA, 200ms reaction time|   
| Standards   |                      IEC 61851|   

===== Dimensions =====

{{hiq_hardware:rdx_charger_dimensions.png}} 


===== Cable holder mounting options =====

{{hiq_energy:rdx_charger:montaza_6.png}}\\

===== Accessories =====


| **Description** 	    |     **Order Code**|
| Wireless external single-phase Power sensor kit|            **WPM1-E-D**|
| Wireless external three-phase Power sensor kit |             **WPM3-E-D**|
| External single-phase Power sensor|            **PM1-E-D**|
| External three-phase Power sensor|             **PM3-E-D**|
| Wireless Modbus bridge |  **WM-1**|
| Wireless relay, to control other loads in the building |  **WR-1**|
| Protective roof      |  **RDX-PR**|
| Freestanding set   |            **RDX-FS**|
| 4G LTE modem for IOT linker **This option is only possible for RDX Charger models that already have an integrated IOT linker**|            **IOT-L2-W**|