Table of Contents
Motion sensor
Passive infrared detector on wall or ceiling
| Model number: | IR-A6-SA |
|---|---|
| Connects to: | lighting circuit |
| Mounting: | On wall or ceiling |
Applications
- Motion detector
- Ready light
- Intrusion detector
- Lighting control
- Hotel GRMS
Features
- Aestetical look
- Easy mount
Installation instruction
- Do not install the detector at position which faces direct or reflected sunlight or near windows with direct car headlight.
- Ensure that there are no obstructions (plants, screens, furniture etc.) in the field of view that may cause incorrect cover/operation of the detector.
- Avoid locating the detector in areas that contain equipment that may change the environment temperature rapidly (i.e. above radiator or under the air-conditioner)
- Install the detector at proper height on a rigid surface. Do not install the detector on vibrating surface.
- PIR detector is more sensitive to the motions “across” the detection zones than “toward” or “away”.
Detection pattern
Range
Technical specifications
| Power supply | 230 VAC |
| Temperature | -20°C ~ 40°C |
Terminals
| Power supply | L | Power supply |
|---|---|---|
| N | ||
| Lighting | L OUT | Lighting circuit |
Dimensions and mounting
1. Separate the bottom-stand from the sensor body by turning it clockwise against the sensor body.
2. Pull the wires through the hole in the middle of the bottom-stand.
3. Fix the bottom-stand on the selected location with two screws as shown on the drawing.
4. Connect the wires.
5. Fix the sensor body on the bottom-stand and turn anti-clockwise.