HIQ LCS is a system of integrated devices and software that is targeted for lighting automation. The primary function is control and management of any lights – on/off, dimmable, LED RGB, LED stripes using local wired or wireless push or touch buttons, Wi-Fi tablets, Mobile phones or BMS/SCADA monitoring and control. Lights can be controlled by scenarios, scheduled, by motion sensors using direct relay modules, DALI, DSI or PWM/Triac dimmable and LED stripes. Although the basic concept of HIQ LCS is simple, the possibility to extend current capabilities or add new is unlimited.

It consists of an LCS controller (MC-230).

Field Input Devices can be:

• any push buttons on binary inputs of Master controller or any other IEX module (DIN rail mount, flush mount or field device)
• touch buttons on Modbus port of Master controller
• EnOcean wireless Wall buttons or Soft remote on EnOcean receiver of Master controller or IEX-2 EnOcean receiver for switches
• Scene panel on IEX bus
• Motion sensors on binary inputs of Master controller or any other IEX module (DIN rail mount, flush mount or field device)
• EnOcean wireless Motion sensors on EnOcean receiver of Master controller or IEX-2 EnOcean receiver for switches

Are used for control of managed consumers. Power relays are toggling power supply or enabling signal for the operation of the device. They are controlled directly from HEMS master controller MC-230.

Are used for manual control of managed devices. Push buttons are directly wired to HEMS master controller MC-230.