en:ms_main:ir-c6-sa
This is an old revision of the document!
Table of Contents
Motion sensor
Passive infrared detector ceiling recessed
| Model number: | IR-C6-SA |
|---|---|
| Connects to: | Lighting circuit |
| Mounting: | In ceiling |
Applications
- Motion detector
- Ready light
- Intrusion detector
- Lighting control
- Hotel GRMS
Features
- Small visible surface
- Aestetical look
- Easy mount
- Water resistant (front side)
General description
A passive infrared detector with sleek and compact housing.
Installation instruction
- Do not install the detector at position which faces direct or reflected sunlight or near windows with direct car headlight.
- Ensure that there are no obstructions (plants, screens, furniture etc.) in the field of view that may cause incorrect cover/operation of the detector.
- Avoid locating the detector in areas that contain equipment that may change the environment temperature rapidly (i.e. above radiator or under the air-conditioner)
- Install the detector at proper height on a rigid surface. Do not install the detector on vibrating surface.
- PIR detector is more sensitive to the motions “across” the detection zones than “toward” or “away”.
Detection pattern
Range
Technical specifications
| Power supply | 230 VAC |
| Temperature | -20°C ~ 40°C |
| IP rating | IP54 (front side), IP20 (back side) |
Terminals
| Power supply | L | Live |
|---|---|---|
| N | Neutral | |
| Lighting circuit | L OUT | Live out |
en/ms_main/ir-c6-sa.1612344026.txt.gz · Last modified: by marjan_strnad