en:ms_main:sw-w3
This is an old revision of the document!
Table of Contents
Scene controller
4 buttons input
| Model number: | SW-W3-IQ |
|---|---|
| Mounting: | in-wall, in junction box behind scene buttons |
| Dimensions: | 50×50×15mm |
Applications
- Push buttons input
- Individual light / dimmer button
- Blinds up/down button
Features
- quick set any lights and/or blinds to predefined value
- configurable button action:
- on/off
- dimmer push button (on/off and 0..100%)
- blinds up/down
- scene
General description
SW-W3-IQ is in wall compact push button input module. Any kind of push-button design can be used.
Technical specification
| LED outputs: | 10 mA, PWM dimmable |
| Inputs: | internal pull-up 12V, 2 mA |
| Power supply: | 24V/35mA |
| Ingress protection: | IP20 |
| Operating temperature: | 0..45°C |
| Storage temperature: | -20..75°C |
| Relative humidity: | 0..95% n/c |
Terminals
| IEX2 Bus | +24V | IEX2 Bus |
|---|---|---|
| CANH | ||
| CANL | ||
| GND | ||
| 1st push-button | GND | Digital inputs common |
| IW0 | Digital input 0 | |
| 2nd push-button | GND | Digital inputs common |
| IW1 | Digital input 1 | |
| 3th push-button | GND | Digital inputs common |
| IW2 | Digital input 2 | |
| 4th push-button | GND | Digital inputs common |
| IW3 | Digital input 3 | |
| 1st LED indicator | QX0 | LED PWM output 0 |
| GND | LED PWM common | |
| 2nd LED indicator | QX1 | LED PWM output 1 |
| GND | LED PWM common | |
| 3th LED indicator | QX2 | LED PWM output 2 |
| GND | LED PWM common | |
| 4th LED indicator | QX3 | LED PWM output 3 |
| GND | LED PWM common | |
en/ms_main/sw-w3.1587360203.txt.gz · Last modified: by marjan_strnad