partners:firmware
This is an old revision of the document!
HIQ-HC FW upgrade
| Download and save CyPro IDE | CyPro | |
| Run and install it | ||
| Download and open project | hc-iq_v127.cyp | |
| Find Home Controller NAD (sticker on top of HC) |  |
|
| Select Home Controller | Hardware Setup [F5]… → Autodetect |  |
| Send Program | Program → Send [F9] |  |
| Start PLC program | Program → Start PLC [F11] |  |
HIQ-DC FW upgrade
| Download and unzip CybroIEXManager | CyBroIexManager | |
| Download and unzip Device Controller FWs | firmware.zip | |
| Start CybroIEXManager.exe |  |
|
| Scan for Home controller | [Scan] |  |
| Select Home Controller |  |
|
| Scan for connected IEX Device Controllers | [Scan IEX] | |
| For each connected device type open HIQ-DC FW | [Open] |  |
| Send Firmware to HIQ-DC | [Send] |  |
partners/firmware.1487770764.txt.gz · Last modified: 2017/02/22 13:39 by saso_santelj