temperature_and_humidity_sensor
This is an old revision of the document!
Table of Contents
Temperature and Humidity Sensor
| Model number: | RB-100-TH |
|---|---|
| Mounting: | In-wall, dose |
| Dimensions: | 85 x 116 x 44 mm |
| Connection: | RS485 to HIQ MC controller or Cybro |
| Frame color: | Black |
Applications
- Widely used in building automation
- Climate and HVAC signal collection
- Integrated use of temperature and humidity and chemical industries etc.
Features
- High measurement accuracy
- Built-in high-performance microprocessor
- Multiple probes available
- Integrated use of temperature and humidity
- Superior performance and long-term stability
Technical specifications
| Power supply: | 10-30VDC Note: 0-10VDC output (limited to 24VDC Power Supply) |
| Signal output: | 4-20mA/0-5VDC/0-10VDC RS485 output (Modbus protocol) |
| Digital output: | Device address 1-255, default 1 |
| Device baud rate 2400, 4800, 9600 optional, default 4800 | |
| Byte format 8-bit data bit, 1 stop bit, no parity | |
| Colour: | 65K colour, 16-bit RGB |
| Active Area L x W : | 71.9mm x 70.2mm |
| Installation : | support rotation 0°/90°/180°/270° |
| Touch type : | capacitive |
| Communication : | RS485 (to MC Controller or Cybro) |
| Operating temperature : | -20°C to 70°C |
temperature_and_humidity_sensor.1639735027.txt.gz · Last modified: 2021/12/17 09:57 by alen.mejak