- en:hiq_home:methods
http://wiki.hiq-home.com/
2026-04-21T12:09:03+00:00
http://wiki.hiq-home.com/
http://wiki.hiq-home.com/lib/exe/fetch.php?media=logo.pngtext/html2025-04-16T12:18:26+00:00Anonymous (anonymous@undisclosed.example.com)commissioning
http://wiki.hiq-home.com/doku.php?id=en:hiq_home:methods:commissioning&rev=1744805906&do=diff
Commissioning
1. Inspect wiring
Check all wires and connections. Overvoltage on inputs or short circuit on outputs will destroy your HIQ device(s). Bad connections will cause unreliable operation and overheating.
2. HIQ power up
Power up the whole system.text/html2018-10-05T13:14:28+00:00Anonymous (anonymous@undisclosed.example.com)customization
http://wiki.hiq-home.com/doku.php?id=en:hiq_home:methods:customization&rev=1538745268&do=diff
Customization
The goal of customization is to perfecttly adopt HIQ system to all end user needs. There are several levels of customization, from simple configuration up to completly custom system with custom hardware, custom firmware and custom GUI.text/html2019-07-24T06:39:17+00:00Anonymous (anonymous@undisclosed.example.com)design
http://wiki.hiq-home.com/doku.php?id=en:hiq_home:methods:design&rev=1563950357&do=diff
HIQ designing
Presented electric wiring plans were made with the help of Elwin software which is made by 3xM Automation company. New plans can be made with modification of included [Elwin project ] or with modification of [ DXF plans ]with any DXF capable program. With the Elwin project, all HIQ symbols are included.
The whole design plan can be also downloaded as atext/html2018-10-05T13:11:34+00:00Anonymous (anonymous@undisclosed.example.com)wiring
http://wiki.hiq-home.com/doku.php?id=en:hiq_home:methods:wiring&rev=1538745094&do=diff
Devices wiring
Discrete (on/off) & Dimmable lights
Individual lights (or hard-wired light groups) are wired directly to the distribution box with an appropriate wire gauge (usually 3 × 1,5 mm2).
Push-button flush boxes are wired directly to the distribution box with signal wires. One wire for each push-button and one common wire (for 3 push-buttons: 4 × 0,5 mm