en:hiq_hw:cr-w2-iq
This is an old revision of the document!
Card reader interface
card reader for 2 Wiegand RFID receivers
| Model number: | CR-W2-IQ |
|---|---|
| Mounting: | DIN rail, 3M |
| Dimensions: | 53 x 117 x 58 mm |
| Connection: | IEX-2 bus |
- card reader for 2 Wiegand RFID receivers
- 2 × relay output
- 4 × switch/potentiometer input
Technical specifications
| Power supply: | 24 VDC (18..26 VDC), 120 mA |
| Digital inputs: | internal pull-up 12V, 2mA |
| Analog inputs: | 0-10 V or potentiometer 10 kohm |
| Relay outputs: | 5 A / 250 V |
| Size and weight: | 53 x 117 x 58 mm, 160g |
| Mounting: | DIN rail |
| Protection: | IP20 |
| Communication: | Wiegand protocol |
| Operating conditions: | 0..45 °C, 0..95 % RH non-condensing |
| Storage temperature: | -20..75 °C |
| Standards: | EN 61000-6-2, EN 61000-6-3 |
en/hiq_hw/cr-w2-iq.1610359937.txt.gz · Last modified: by goran.kocjancic