Configurator

Overview

1	Page navigation
Overview page
Access code management page
Settings page
UI settings page
Events overview page
2	Entry procedure steps status
count_status
disinfect_status
temperature_status
code_status
confirmation_status
entry_status
3	schematics
4	Occupation counts
Occupation count, click to correct the actual number of visitors.
Occupation limits L1 / L2
5	Command buttons
Gates Auto / Manual mode toggle
Alarm reset button
Confirmation button

Access Code management

1	Edited code
Click to enter the code you want to edit.
2	Code type
Click to select edited code type. Options ate L1 (level 1), L2 (level 2) or UL (unlimited).
3	Access point limits
Click to enter count limits for each access point.
4	Code activation date
Set code activation date and time. Set all to 0 for the code that is active immediately.
8	Code expiration date
Set code expiration date and time. Set all to 0 for a code that has no validity limit.
6	Edit code commands
`[ search ]` = Find settings for “edit code”.
`[ save ]` = Saves the code being edited with all settings.
`[ clear ]` = Clear all edit settings.
`[ delete ]` = Delete edit code from the list.
7	Codes list
List of access codes on the controller. Clicking on the code picks up all the code values in the edit fields above.

Settings

1	Entry conditions
Count limits: set count limits for L1 and L2; 0=not limited
Disinfection: select if hand disinfection is required
Thermal scan: select if body temperature scan is required s
Reader: select if code reader is required
Confirmation: select if confirmation is required
2	Entry detection settings
Entry detection type: select entry detection type
Entry time-out: max time between consecutive steps
Confirmation time-out: max time allowed for confirmation
Block time-out: time for hi temperature or wrong code alert
After all time-outs entry procedure restarts.
3	Code reader settings
Access point ID: ID for built in access point. Used when S Gate is part of bigger Access control system
Thermal scan timeout: set the time for which the system remembers the temperature scan for the code user
Access master code: set the code for local codes management
Send LAN code query: set to enable sending code queries to other access controllers on LAN
Process LAN code query: set to process queries from other controllers on LAN
4	Auxiliary input settings
AUX input type: set auxiliary input function to presence sensor or to call button
Presence / Call time-out: aux function timeout
5	Gates settings
Entry gate time-out: set entry gate signal timeout, 0=no entry gate
Exit gate time-out: set exit gate signal timeout, 0=no exit gate
6	Alarm settings
Alarm duration: alarm active duration time
Alarm beeper enabled: set to enable continuous beep during alarm
Reset alarm on exit: set to reset alarm when exit is detected
7	Hardware overview
Control system overview
Select `[ Autodetect ]` to find S Gate controller in LAN (when red Xes are displayed)
8	Wireless devices management
[]wireless management: set to enable management of wireless devices
first icon: wireless device paired status (x=none, ✔=paired)
second icon: displaying wireless signal strength
third icon: wireless device operating as repeater (click to enable).
`[-]`: delete wireless device
`[+]`: add wireless device
9	Controller date and time settings
set S Gate controller date and time.
10	Parameters management
`[init parameters ]`: initialize all parameters to factory default values
`[save parameters ]`: save all parameters to permanent memory
`[read parameters ]`: read all parameters from permanent memory

User interfaces settings

1	LED display texts settings
Click to set the texts displayed on the LED display. Edit text alignment with spaces.
1	GUI display texts settings
Click to set the texts that appear on the graphical user interface. The text will be centered automatically.

Events overview

1	Events list
The last 20 event codes and data are displayed. Event #00 happened last.
2	Events legend
Legend for event code and data.

Table of Contents

Configurator

Overview

Access Code management

Settings

User interfaces settings

Events overview